MEIJIAPortable Waterproof Protective Case,Hard Camera Case With Retractable Pull Handle And Rolling Wheels,Customizable Fit Foam Inserted,Elegant Black, 31.56"X22.99"X19.49"

If you are looking for a large, protective trunk for your camera gear, this is perhaps the biggest and best value case that you can find.The material is a dark ABS that is both sturdy and professional looking. The case is very deep and they supply a thin cut of foam to line the bottom and 3 larger foam layers for your gear. The foam is a very nice quality with the little precut slots that make it easy for you to customize a secure fit for your gear. The case is hefty even when empty, coming it at about 42 pounds with the foam inside.I can confirm that the inner dimensions of the case are as approximately as given on the web site, maybe a tad less. Note that these are the dimensions without the foam padding inside.Transporting the case from work or home to another location via car or plane is made very easy with 4 smooth rolling polyurethane wheels (in 2 groups of 2) on the bottom and a retractable handle that pulls out on the opposite side. There are also 2 large hand-carry handles on the short sides of the case to provide grips to lift this into your car or van. The case is so large that if you fill it up, you may need to people to lift this. The fact that the handles are over 15" long is a good thing because you can get two hands onto each handle for a safer lift.I didn't test the IP67 rating of the case but it has a waterproof O-ring seal and the ABS is pretty solid with a lid that closes and latches securely. There are 7 latches total, with two on each of the short sides and three on the front of the long side. There are 4 holes with metal trim that are for attaching locks if you need that extra security. There is a flat, white plastic piece on the retractable handle side that can be removed when the case is open. It appears to be a label holder, perhaps like a luggage tag for air travel. It has a pressure valve to release/equalize pressure after high altitude trips.This is extra large capacity case is a very handy, professional way to transport all the gear you need in a safe and secure fashion.

I bought this less than a week ago, loaded equipment (less than half full), just flew three hours, picked it up from baggage claim. It is warped, caved in, the handle will not retract. For as heavy duty as it is supposed to be I just spent almost $400 on a case I cannot use again. Very disappointed

First off this case is huge, I got this storage case to store and transport my video equipment and I am pretty impressed that I was able to fit several tripods, LED panel lights, all of my accessories and even both of my cameras with them still in there original cases, the case itself is very well made, it looks like a professional case and it feels super durable, the case has 2 wheels on it and a retractable handle, so its easy to move the case around, the lid has 7 latches that lock tight and keep the lid securely closed, the lid also has an foam egg crate style padding to it, but the only negative with the lids padding is that it is not attached to the inside of the lid, so it falls out of the lid when you open the case, but I was able to use a couple strips of velcro and fixed that issue, the one thing that I really like about this case is that it comes 3 thick layers of the pluck and pull foam, I was able to customize the foam to fit my all my equipment perfectly, the foam also stays together really good after customizing it, so I was able to create 3 different layers of storage, there is also a thin foam padding on the inside bottom of the case, overall I am super happy with the quality and the size of this storage case, well worth the price in my opinion to protect my video equipment.

MEIJIA Portable Waterproof Protective CaseThe case is tough, sturdy, and large. I found it to lock well, the hinges are robust, and the cover shell very, very, resilient indeed. Inside, I found foam that can be shaped to virtually any outline - say a telescope, high end video equipment, or that gold I laugh about above. I have seen less sturdy cases at Federal Reserve Banks (for moving money and specie from one vault to another) so this one surprised me. That gorilla from long ago on the luggage commercials isn't doing a darned thing to this roomy camera case, either, no matter how hard he kicks it around.The case looks expensive. That said, anything worthy of carrying in it - like my full camera kit is costly, too, and a few hundred dollars to protect $30,000 worth of cameras heading to Asia for a shoot is NOT expensive at all. You will NOT go wrong with this case!An STG Synergies BTN Enterprises Review!

I was looking for a hard shell tote for travel. What I got was far more than what I expected. Here are the pros: Actually larger than I expected. Multiple lock points. WAY heavier construction than I expected. Side handle lock in a down position when not used so they wont catch on things. Roller handle stores completely out of site. The only real negative that I see is that the rollers are a little smaller than I would have expected them to be. I would have been willing to loose some internal space to have a slightly larger diameter wheel. However they do not catch on anything and are better than scooting the case on the ground.

Firstly, this box is massive, and is extremely well built. It has gaskets on the surrounding top lid, can be secured. It also has several individual layers of foam padding that can be cut out to fit almost any item, or a few items. This easily holds securely, all of my photography equipment, and I am not at all worried about weather, or unfortunate spills getting on my soft boxes, or my lenses.Be aware however, this box is extremely well made, and as such it has a LOT of weight to it as well. That is another reason you can rest assured the build quality is impeccable. I absolutely love how customizable this case is. It can honestly accommodate almost anything you’d want to safely transport. It does have wheels, which makes it easier to move around. Due to the weight, it can be a challenge getting it in and out of your transport vehicle, but once you’ve done that, there’s no worries. This is a FANTASTIC carrier. I very highly recommend this to carry and care for your precious cargo!

Control and quality needs to be tighten for the product. It gets damaged easily for a protective case and needs a design review to prevent damage in the corner. I don't think it's a fluke if I am the second person to get corner cracked when received and the worn rubber wheel.Attached is the picture where the damage is.I had great hope this would be used to protect my Camera equipment, but now it's unsealed and no longer air seal.

This is a nice extra large protective waterproof rolling carrying case for my gear. I am using this case to carry my computer and (2) 27" monitors. Keep in mind, this is a very large and heavy duty case even when empty. The lid with (7) latches to make sure when closed will seals very well for the waterproofing and (4) reinforced stainless steel areas for pad locks to secure your gear.The protective case has (3) large customizable Fit Foam Inserts that is all precut to get the shape of the gear your protecting. The case rolls easily with 4 heavy duty rollers, nice strong retractable pull handle as well as a thick heavy duty side handle. This is a very strong heavy duty case that will protect your gear and when you compare this protective case to the brand name at the big box stores, this case is a fantastic value.

My case arrived to me intact, and seems very beefy. I can't find any fault with it. But I have not yet had any chance to subject it to air travel or any other application in which it would get really banged up.I find the reports by other reviewers that their cases arrived with cracks concerning. Perhaps the plastic is not strong enough? I don't know.My case seems to be properly reinforced, with strong clips, handles, and wheels. It has a gasket around the perimeter. And it's filled to the top with adjustable foam inserts that are quite dense, and easy to modify to accommodate whatever it is you intend to store.I personally have no complaints about this case at all, but a buyer should take heed of the other reports that are not so glowing.

If you are buying a case to protect the contents inside, the case should at least make it to you in one piece. It’s not reassuring if arrives cracked and broken, especially the corner as that should be the strongest section.Very disappointing as the remainder of the case was actually quite impressive. The wheels work well, the pressure snaps are great and the pluck foam is decent. All irrelevant if the exterior is compromised.