Black Spot Remover is designed to be used neat so apply with a low-pressure sprayer, watering can or straight from the container. Lightly pre-wet the surface with clean water surface before applying the product.Apply Black Spot Remover neat and allow the product to dwell on the surface for 2 hours, do not allow the product to dry out during thistime. Either add more product or mist over the area with clean water. Periodically agitate the area with a stiff brush. After 2 hours have elapsed rinse Black Spot Remover away with clean water. For best results pressure wash the area that has been treated. Be aware that this product will effect adjacent plant life and vegetation so keep away from lawns etc. Rinse any adjacent areas which is likely to be effected with clean water.Directions for Use:Perform a test application in an inconspicuous area prior to use.Lightly pre-wet the area to be treated.Apply to the surface using a low-pressure sprayer, watering can or neat from the container.Allow 2 hours dwell time.Periodically agitate the area treated with a stiff brush.Rinse away the product with clean water.Pressure wash the area after treatment for best results.Please NoteRinse down adjacent lawned areas etc with clean water if required and do not allow the product to get into garden ponds etc. This product can discolour organic clothing materials such as cottons etc so do not allow the product to contaminate any clothing. Wear Suitable PPE and work clothing.ImportantSaftey / PPE SuggestionsRubber gloves, protective eye-wear & face mask should be worn for safety.Coverage & Wear25m2 per 5L, use this product neat.Aftercare & MaintenanceReduce the need to repeat clean by applying a sealer after the cleaning process.Handling and StorageStore only in original container in a cool, well-ventilate
Trustpilot
2 months ago
3 weeks ago
