Product description Function: Measure AC/DC current, peak hold, online monitor Size of clamp: Φ68mm Range DC:0.0A~2000A AC:0.0A~1500A Accuracy: ±2%rdg±3dgt Resolution: 0.1A Dimension: 224mm×115mm×43mm Data interface: USB Weight: 515g(with battery) Power Supply: Zn-Mn dry battery 6F22 9V, lasting for100hours Test Mode: Clip-on CT, noncontact mode Display Mode: Four digits LCD display LCD Dimension: 35mm×21.5mm; display domain: 32mm×15mm Frequency: AC 45Hz~400Hz Sampling Rate: 2 times/s Polarity Indication: DC current auto identified and display“—” Test Position: Tested wire in the jaw center; Error will increase to 1.5%rdg max if deviate the center Range Shift: Automatically Line Voltage: AC600V Software with the software the data can upload to computer Data Memory: 99units, FULL blinks when the memory is full Peak Hold: Push HOLD without release, the meter will show the peak value during the pushing period Reading Hold: DH indicating the reading is hold Out of Range: OL indicating the current is out of range Auto Power-off: 5 Minutes after power on, it will power off automatically to lower the power consumption Battery Voltage: Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed Consumption: 10mW Temperature and Humidity: -10℃~50℃; Below 80%rh Max error refer to environment: -10℃~0℃,40℃~50℃,Error will increase max to 1%rdg Temperature and Humidity for storage: -10℃~60℃,below 70%rh Insulating Strength: AC2kV/rms. (between the alloy of the clamp and the housing) Applicable safety rules: IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V) Accessories Meter: 1pc; USB communication line: 1pc; software: 1pc; battery (6F22 9V):1pc.
Trustpilot
1 month ago
3 weeks ago
