WhoopStor V3 6 Ports 1S LiPo Battery Storage Charger and Discharger with LCD Display Tiny Whoop Charger with PH2.0 and BT2.0 Connectors

Fantastic little charger. You can tell from the design features that the designers actually use these things. It can be powered from the wall, USB, or an XT-60 with 2S-6S batteries. It supports the latest BT 2.0 connector (think tiny XT-60) and comes with 6 PH 2.0 adapter cables, so you can make converter cables for XT-30, JST, JST-DS LOSI 2.0MM, or whatever you need. So I can use it for my whoops (PH 2.0 and XT-30), mini warbirds (JST-DS LOSI 2.0MM), 1S UMX, etc.Best feature? It's got a variable voltage (note that only storage and full voltage options are provided), which is a feature that in retrospect I cannot believe all 1S chargers don't have. 1S batteries need love too! What's even better, unlike many chargers, you don't have to tell it whether to be in "charge mode" or "storage mode": it just takes all batteries to whatever voltage you have set. The way I use it is to set the voltage at 4.2 and continuously cycle batteries through during my tiny whoop flying session. Then when I'm done flying for the day, I throw all my batteries on the charger set at 3.8; the ones I used will be charged up to storage, and the ones I didn't will be discharged down to storage.My only gripe is that the color screen is rather small and hard to read, especially in the sunlight. But that's a minor complaint. This is by far my favorite 1S charger!

Works like a charm if I need to put the battery’s into storage mode to 3.8 from a full charge it can do so

This charger is the best whoop charger I have come across. This product was recommended to me and the amount of features that it boasts is amazing. The fact that it has usb-c, dc, and XT60 input makes it so easy to charge my batteries at home or on the go. You can plug your larger batteries into this thing and charge like 10 of the 1s batteries.

The charger does require a decent cable, which is understandable. If your cable doesn't have a good enough output, the charger will reject it. Once you find a good cable, the charger is reliable and consistent. Couldn't ask for anything better.

I really wanted to like this and the mini-screens are great but what I am missing is the lights from the previous version. I can at a glance see if any of the channels are still charging or have finished. This new version you have to get very close and read the screen and look for a very small icon of either orange on white background or green on white background for each of the 6 boxes. I feel this is a big step back for that one point otherwise the screens are kinda cool.Another point on old version vs new, there used to be a physical switch to flip for storage mode and 4.2 vs 4.35 HV. It was stupidly quick and efficient but now it is a series of mashing the 2 buttons until you figure out the right combination to turn on storage mode or HV/not. And no you still can't have some HV and some not, it's all or nothing in both versions.Last point on the new version is that it is significantly taller/thicker than the previous version. I am not sure why it needed to be so much bigger as the only change is the addition of a slightly bigger color screen.The move to put both connectors types on the top next to each other is either here nor there. I have used both of them and it's not really a positive, it works both ways and It's just different, not necessarily better or worse. They both support both types of connectors and no reason for either version over the other on this aspect.Overall it is a very capable charger and really the best out there for 1S batteries....except for their previous version. For now it has gone on the shelf and I am still using the older version as it is functionally identical and the design choices made in the newer version I feel are a step back. I would personally recommend looking for the older version instead if possible as it really is superior.

Great

If you tiny whoop and don't have one of these it's time to buy one.

Not a bad product by any means, but better when on sale. Works perfectly 👌.Edit: 08/28/24. Sound indicator stopped working. Fan stopped working. Will still charge, but I'm afraid of it catching on fire.

Sin duda el mejor cargador de baterías 1s, no hay nada parecido.

Si vuelas whoops, debes tener esto en tu Kit

Einfache Bedienung. Praktisch ist die Funktion für Lipo Lagerspannug. Nur der aktive Lüfter ist ein wenig laut.

Err IMPUT LOW Charge protocol 775.when using usb cable provided out of the box I FIXED IT !!!! HELPs HERE !!!.I found by research and other people .If like me u plug it into ur computer/wall plug/Buzz bar with usb it will give err message and will NOT let u past said massage .REASON being ur computer (IS NOT) putting out the power that this charger needs u need to use an adapter .The information is on the VIFLT page ..INFO off VIFT WHOOPSTAR 3 as follows It supports Type-C, XT60 and DC power input. Type-C used PD and QC protocol that supports fast charge at 9V and 12V, but it not supports regular 5V USB charge.

Hallo ich verwende das Ladegerät zum Laden von 1s Lipo Akkus und das praktische ist man kann das Ladegerät mit einem 4 oder 6 s Akku mit einem Xt 60 Stecker betreiben und somit die 1s Lipo auch auf dem Feld laden und endlich Lager Spannung mit 3,8 v und 3,85 v ich liebe es…