Spigen Neo Hybrid EX iPhone 6 Plus Case with Flexible Inner Bumper and Reinforced Hard Frame for iPhone 6S Plus/iPhone 6 Plus - Metal Slate

I actually love this bumper. It's dual layer, so there's a piece of rubberized material that wraps around the edges of your phone, then the rigid outer frame lays on top of it. I wasn't exactly sure how it worked until I put it on. That said, I can notice that if you squeeze the phone on the sides, you can see how much give there is to the inner layer. It keeps my phone neat, keeps that pesky camera lens off any surfaces, and is minimal in design.My biggest problem with the bumper I bought for my iPhone 5 was that it was a single layer (had some rubber on the inside, but not fully) and the plastic wound up scratching off the paint job on the edges of my phone.I didn't really have much problem pressing the buttons, but I put the stabilizers on anyway that Spigen sent me. For anyone who needs to put them on, they go on the INSIDE of the bumper, not the outside (I'll admit, I put them on the outside at first, looked at it and thought, "What the hell is this going to do?" - then I looked at the instructions again [which are just images] and it made sense after I looked carefully at the cut out and the image itself).I think if I had to complain about any parts of it, it would be that a) dust tends to collect in the crevice between frame and front glass and b) the mute switch is a little too far recessed - I have to use the tip of my finger to get in there and toggle the mute switch.

This is a great bumper, and I really like it. It is well made, and Spigen has always created quality products in my experience. That being said, because the iphone 6+ is so thin, and so large the sides of this case can be a little flimsy (when pulling the phone out of your pocket (not tight pockets) if you grab the case it will flex away from the phone) I have no doubt that this will protect my phone from small drops where it hits the sides as designed, however I think I will probably find a case with a back to better protect my phone in every day use.all an all, if you really do not want a full phone case, then this is a great option. However with how thin the iphone 6/+ is I am not so sure why you would not just go with a full case since the lip around a bumper (to prevent the back and front of the phone from being scratched while it is laying down) is about how thick it would be with a back anyways.

I will say this is a Great Bumper as has been the "case" for awhile now. However with this new bumper i find one big drawback. It is an understandable design element if you want to promote your company, but my previous bumpers didn't have the "spigen tag" on the back and just had it engraved on the actual bumper where as now it has Neo Hybrid. I guess to me Spigen went a little overboard in labeling there product this time around. I just prefer a more sleek look but like i stated first this seems to be a durable bumper for the type of case it is.Update: so I got my phone now and had to literally pull the bumper apart to get it on. Currently it is sagging on both sides slightly. Also my biggest complaint is I can't reach the mute switch unless my fingernails are half an inch long. This is horribly designed.

Exactly as advertised; however, I will add one quick note. If you have any sort of full-phone decal such as DBrands, the bumper case can be fitted over it but will be very stressed. My bumper case snapped about 5 days after putting it on. I would not recommend combining this case with a DBrand vinyl.

Decent bumper. Didn't get a chance to use without the button adjusters so I can't speak to how the buttons feel without. With everything is responsive and clickable. The case looks great though is a bit thicker than I would prefer but I think I will be using this long term. Spigen make solid products. Seems like they have skimped on packaging lately though. Regardless if you are looking for a quality bumper this is it.

Very inconsistent product. The 1st one I purchased was a slate bumper version, liked it, partly because of the fact that they included both front and back protectors and even a cleaning wipe. Though I didn't really care for those "free" stuff except for the back protector since it's a bumper, the way of dealing with their products that Spigen used to be impressed me. So when Wife wanted a bumper for her phone I didn't even think for a second and went for another Neo hybrid bumper. But this time, despite the price being higher (different color), nothing but the bumper came in. So now I'm going to hunt for a back protector. Guess which one I'm NOT going to get.

This is my second Spigen case, as I had the Neo Hybrid on my iPhone 5. That case was excecptionally protective, stylish, and well built, and this case is no different. Being a bumper, it adds very little bulk to the phone, but, with the two-piece construction, it feels solid and protective. The buttons aren't quite as responsive as I'd like, but Spigen's already reached out and announced they're sending an easy to install fix. I also could do without the branded tab in the back, but I'm not deducting any stars from the review as it's plain and apparent in the pictures.

I loved this bumper and used it for five months. Then the outer frame broke at the cut-out for the mute switch. The material is very thin at that point. If they would reinforce it, I would buy another. It is a great two piece design, an inner rubbery gasket with a hard outer frame. It provides protection against drops, without adding bulk. For the premium prices that Spigen charges, I expected better longevity. I still like the brand. My wife has the Spigen clear air cushion ultra hybrid and loves it. I am happy with my Spigen slim armor kickstand, but I prefer a simple bumper. I hope Spigen fixes this design.

Oh my god its big - what have I done!The bumper looks great - that's what it is just a bumper. A very expensive one. Wish I'd studied a bit more as I thought by the nature of the description 'case' it would have a back cover. So only 3 stars from me or not being more transparent in your description. The visual looked to me like it must be a see thru back. So that will be returned.But what has left me a bit concerned is now in the cold light of day i can see how big the Iphone 6 plus is going to be. Compared to my 5 It's massive. I'm pretty sure it wont go in my pockets for starters. And operating it - well if I grip at the bottom I think my thumb can get about 3/4 of the way up the phone & I've got quite long fingers. So a two handed operation every time you use it. Which sounds simple enough, but when you've been accustomed to one hand operation for a long time i bet it will take a bit of getting used to.I'd recommend anyone thinking about getting a 6 plus to cut out a bit of paper to its dimensions and take a good look at it first - maybe the 6 will be a better option for people who want to keep the portability & physical one handed accessibility of the prev generation.I'm getting my phone on Friday apparently, so will make a decision whether or not to keep it shortly thereafter!

Well to start it's not a case, this is going to do very little to save a phone in an accident. I bought this thinking it had a see through back, complete waste of money, gutted.

rubbish!!!!! no front or back protector, just bumper!!!!!

Very good product many thanks

Ok well to start, I've never owned a bumper case (without the hard plastic back) and have usually gone for Speck cases on all of my old iPhone's. But when none took my fancy for a price I wasn't willing to pay for something I wasn't keen on I came across the Spigen Neo Hybrid... At first I was a bit weary of it being a bumper case but as in general I am very careful with my phone I wasn't worried about dropping it, but just wanted the protection for the peace of mind. When I got the case I was happy with its simplicity and hopeful it would do a good job. Didn't actually have any issues with the case making any marks on my phone or any issues until yesterday when I noticed it had cracked under the mute button. It is a shame because although I do like having a bit of colour to a case I liked the fact you could properly see my phone, but I can't lie, ten months for having a bumper case which has never been misused or dropped is a bit disappointing! Only ever had to buy a case twice for my phone and that was two phones ago now... Going to try the Tech 21 case (rubber version) as my partner has the plastic version and it looks solid!