Professional Heavy Duty Pull and Pry Bar, Hard Flooring Installation, The Bullet by MARSHALLTOWN, Made in the USA, 712HD

Worked great. Heavy duty built to last. Great for floor install with felt on bottom so doesn't scratch flooring. Also used it to install top row of t&g boards on walls.

Glad I bought this heavy duty bar. I have a cheap one from the orange store which sometimes is necessary as it is only about 1.5 inches wide. But only use it if this one can't fit. Has made my first time laying laminate so much easier.

This is a REAL pull bar. Spend the extra money to get this heavy duty bar, that's made in the U.S., instead of the cheap garbage they sell at Big Box Store. This tool will outlive you and your next few generations as well!

It appears that the only things that will wear out will be the coating of paint and the protective felt pad strip stuck to the bottom. I was a little disappointed with the sharp metal burrs on some of the edges that could/would cut skin and snag clothes. I was able to file all offending edges with very little effort. I highly recommend this product.

works great

This is a great tool. I would have given it 5 stars except for three things.1. The angle iron welded to the end is really thick. If you are working with a very little room at the walls , be ware. The angle iron is thicker than other floor pulls.2. The weld on the one that I received, holding the angle iron end to the main part, broke after only about 2000sq ft of flooring. I am thinking it should have lasted a little longer. Luckily I was able to weld it back on.3. It is loud when struck with a metal hammer. Started using a hard rubber mallet when I can. It works pretty well to dampen the noise.The design it well thought out except for what is mentioned above. Everything mentioned above it fixable and I will continue to use this. Better than any other pull I have used in the past.

good

So much better than the cheap ones that come in a kit. Worth the expense if installing flooring.

Seems solid, like it won’t bend after it’s been hit a few time

This is made to last, it has felt under to protect the floor and is the only tool you would ever need, I doubt even a professional Laminate installer would buy more than two of these, unless he works alone and then only one.The only reason I could see why you would ever need to buy another tool is that you gave it to some one to use and they didn't give it back or you misplaced it and can't find it :)Yes it costs more but saves the time and effort over the cheap crap, I would have saved $25 had I bought this straight away, the cheap tool kept bending and just didn't do the job very well, to much flex and so you have to hit more often, this tool one good smack and it's in first time every time.

I recently used this bar to install 1800 sq.ft. Of vinyl plank. It was indispensable and I would highly recommend.

One of the best pull bar

Used so far to loosen and remove stubborn baseboard. Have not yet used to install laminate but it is a weighty tool and think it'll do the job.