DC 12/24V 10A Low Voltage Ceiling Sensor Pir Occupancy Motion Detector,360 Motion Sensor,8-12M High Sensitive Ceiling Motion Sensor Switch, Commercial/Industrial Grade, White

This worked better than expected. I have it set up in a laundry room. Ease of use for me now on. No more hands full and trying to flip the switch.Install was a bit tricky as I was trying to mount this on a ceiling box. The holes in the box do not line up with the holes on the sensor. So, be aware of that.Set it to lowest sensitivity due to cats using the litter box. I didn't want them setting it off. Works as soon as I walk by the door and shuts off quickly after I leave.

Works well on 12 volt security lights ,

Overall the Motion Sensor does a good job. Wiring is pretty straightforward but getting the wires in the hole is a challenge due to the fact the holes are restricted by the housing. Since the unit is mounted in a ceiling it would make more sense to have the wires inserted in the top. That said...I finally got the wires bent enough to get them in and it worked fine. The only other issue I had was trying to get the Lux settings to work for my garage (door open most of the time). Finally I gave up and turned the Lux setting to off and with the timer set to 5 minutes. I'm happy with that and for the price, would recommend the unit.

As the review heading states, we were so impressed with these that we have now ordered two. We will probably order more as we are finishing our unfinshed basement. We got the first one to automate the lights at the base of our basement stairs. The existing light switch is in a dumb location and you are always fumbling in the dark and trying to find the switch. This occupancy sensor took care of that right away. However, it is the features and functionality on this that have prompted us to order a second (for the basement workshop) and possibly even a third (for the storage room). First, this installed very easily and is sized to fit on a standard sized round junction box. Most or all of the features are accessible from the surface of the unit - which means you do not have to take it down to change the settings. The sensor is highly sensitive, had a huge range of sight, and catches our movement even if we are not directly in view of this. There are abundant time-delay settings so this is highly customizable. It also appears this has a daylight sensor on it which will keep the lights from coming on if it senses daylight from nearby windows. (We haven't tested this as most of our basement has no windows.) You can override this on the unit, but this is a great energy saving feature. If you have daylighting, you *shoudn't* need artificial lighting. I am super impressed that this occupancy sensor has this feature. If you opt to order this, make sure you are ordering the correctly sized unit for the amount of lights you have. The 5A unit will carry up to 500 watts give or take. The 10 A will carry the 1100 W listed on Amazon. Finally, the price is fanastic, making this occupancy sensor an exceptional value.

What is blatantly wrong with this product? There is only one wire hook-up (terminal) for the 12 volt Load. For this product to work right, its needs two terminals for the 12 Volt load: one for positive (+) and another for negative (-). You can't twist together your positive and negative wires together onto one terminal. LEDs are all wired together separating the (-) and the (+). Have you every seen the common flashlight battery joining positive with the negative sides of the battery? The result will create heat and sparks. The light sensor I wanted to replace has two Load terminals (-/+), the replacing sensor I'll need to purchase in order to rectify RayZeek's design flaw has two terminals to hook-up the (+) and (-) wires onto the sensor. My responses from RayZeek fell silent when confronted with their product flaw.

Product is easy to program and design look good but functionality not so good. 1st unit put up burn out after about 10 times sensing or so, order another one put it up and walking under neath the sensor but still turn off the lights, PIR do not work well with High setting. Another annoying thing was when turn on the switch lights come for 2 seconds then sensor turn the lights off then immediately turn lights back on for approximate 1 minute green LED in sensor not work at all then it turn off lights again. For 3rd time sensor turn on lights then it would work normal but must really moving around to keep lights on, probably this is what is cheap motion sensor are. Bought a different brand name item little costly but work as it supposed to.

Very good thanks

took me longer to mount then it did to wire and program settings I was desiring .my load is approximately 8 2x3 led commercial lightfixures running on 120 volt in repair shop

Working great. The center bulge does blink a green color, at different times, pretty steady blink every couple of seconds. The wiring seemed kinda weird but it is actually easy. I have the 120v model with neutral wire.When you wire it, the neutrals all get wired together like a regular switch in a box with a white neutral jumper also going to the "N", on the motion sensor. The live wire "L", gets the black wire that always has live power going to it, from the breaker box.The "L¹" is the load terminal. That wire will go to your light (black wire). The white wire from the light gets wired together with the other white wires in all the boxes, which has the white jumper going to "N".So basically it gets wired like a regular 120v switch in the box, but since this motion switch need power to "sense" motion, it needs direct power as well, so that's why it gets a jumper from the white neutral bundle in the box.In my scenario, I also wanted a "dimmer" switch, so I can dim my lights. I put that dimmer switch in between the motion sensor switch and the lights.... Not in between the breaker panel and the motion sensor. (I wasn't sure if the motion sensor would operate properly without full power going to it.) I do know that it does not need full power, but how low it can actually go. So that's why I wired it like that.The motion sensor switch also turns on slowly, on a fast ramp, so the lights don't come on so fast to scare you lol.The digital buttons on it are super nice. I drew black marker lines to the corresponding led to let me know which setting I put it on. The molded writing on the unit is so small, it's hard to read. Once the white cover goes back on, my black writing can't be seen.Very nice, cheaply priced unit.I will definitely buy more if I need to!

Works as described even in my 9foot ceiling . BUT minor installation issue. Looking on edge the terminals are labeled "N - L1 - L" BUT looking up the terminals are labeled "N - L - L1" I don't know if anything bad would happen if line and load were powered up the wrong way.

Working well as I expected

I sent an email and asked for the paperwork showing that this item is CSA or UL approved but I have not received any response yet. I am returning the items as they are not legal to install in Canada.

Works great