Nuie TVT315 Series Two ǀ Modern Bathroom Round Cloakroom Mini Basin Mixer Tap with Push Button Waste, 131mm x 50mm, Chrome

Seems good quality, nice action.The tap is small for a large sink. If the hole in the sink is greater than 55mm from edge to centre, then the tap spout will be a bit close so edge & splash onto the sink top is likely. I note that Nuie make a larger model, KC319, which would address this issue.The hole in the sink was a shade too large for the 50mm dia seating ring (top side if sink) & the clamping plate (underside of sink is woefully small. The hole in the sink also has rounded edges, making the mating surfaces an even worse fit. This is not the fault of the manufacturer per se, but still rather annoying.I ended up 3D printing a top & bottom collar, which allowed good contact under the sink & a face to stop the seating ring sinking into the hole rim on the top. I don't know why no-one seems to have addressed this before.

Although the instructions were a little unclear the product was fairly easy to install for a DIY'er, especially with the help of YouTube (FYI the little allen key screw is to help centre align the unit in the overflow cut out on the bath). The flow appears slow but the bath does fill at moderate speed, I feel it could be a bit fast put the outlet is a lot wider than you typical tap so feels more like a waterfall than a hoseBiggest concern is the fragility of the material used for the overflow waste. You can see the angle of the pipe in the picture and manoeuvring it slight in that space was enough to cause the corrugated section of plastic to come away from the smooth section that joins it to the appliance. I would normally send a product of this build quality straight back, but the overflow and drain pieces have already been sealed in place so I have had to force the broken section up into where it had broke off and apply copious amounts of Plumbers gold. Whether this holds over time we will see, but hopefully this may help anyone else in the same position. I may have had a faulty unit and I am still in 2 minds as to uninstall it and send it back, but I will do further testing.

Replaced an old style mixer tap which gave up the ghost after several years. Initially the flow to hot slowed down so assumed it was a valve but plumber indicated that the tap had simple stopped working on one side of the flow (cold was fine).Instead of having to fork out £100 for a plumber you're better off avoiding and going with a proper brand.

Had a few issues receiving my taps due to my first order disappearing courtesy of Royal Mail, but the 2nd set turned up a day after the new stock came in, as promised by the Customer Service team.The taps are a little smaller than my original taps of the same design and would go nicely in a small wash-room / half size sink.They don't look out of place on my full size sink, it's just I can't do what I planned which was to only replace the broken one, I don't mind I'll keep the old one as a spare. The internal ceramic discs don't fair well in heavy water areas and both my bath and sink taps have suffered on the cold water tap, so I'm interested to see if these are a false economy.I paid a lot more for my originals from Homebase, probably double - so I if these last as long and don't suffer the same issues I'll be very happy.

This is brilliant. Very easy to fit. I just needed a pair of 15 -22mm adapters @ couple of pounds each as my feeds were 15mm.Really nice operation looks smart and works well. The completely "clean" look on bath top gives a great finishGoing to get another for other bathroom.

The off and on positions are not as you'd expect. The water is off when the levers are down (horizontal and pointing at you), and then on when up (vertical and pointing to ceiling). You cannot reverse the tap body due to grub screw at rear, and you cannot switch the valve heads around as they are stuck solid in the housing.Returned as not in line with every other tap of this design in the house. A shame as great value for money.

Received both taps, fitted then noticed a tiny hole on the back of the hot water tap and water was spraying out. I can only assume these are made very cheaply or are very thin as I have never seen a hole on the back stem of a tap before.Emailed seller for a replacement, 48 hours later still no response so had to send them back for a full refund when I would of happily accepted a replacement. Refund was issued immediately.Overall not a great experience, had to order another set of taps elsewhere.

Neat and tidy minimalist look! Used this tap many times before, no problems