GODESON Ball Foot Air Chuck, 1/4" FNPT Closed Flow Tire Chuck Made of Brass, Tire Air Nozzle for Tire Inflator Meter and Air Compressor(Pack of 2)

I sturdy, solidly build and most important works good!I am pretty demanding, but this air chuck fully satisfied my expectation.

I recently purchased a "midrange priced" electronic tire pressure gizmo here on Amazon. It was decent enough, but the cheapo "toy-like" chuck it came with was a headache to secure precisely. So it was nearly impossible to get an accurate reading. Instead of returning it, I ordered this pair of Godeson chucks and what a world of difference. These brass beauties clip on securely in a flash without any pesky leakage. I KNOW a well engineered fitting when I use one, and not gonna lie, this Godeson chuck knocks it out of the park.

Haven't had chance to actually test it on air line to valve stem, but high spring action should grip quite well.Not sure why some wrote that it didn't work well, but I'll simply assume they didn't apply it correctly down tight on valve stem before releasing lever.For some, Hammer's are forced to include translated Instructions.As Shop Tech for Dealers for fourty years, automotive to airliners, pretty hard to fool a farmer now.I'll update with actual test later, now that it's twenty below zero, I'm not in a real hurry with live video.CheersUPDATE - Unfortunately there is an issue with this fitting internally.When held vertically in hand with threaded end up, pressing the lever jams up and will not depress -flip it 180, and lever moves Ok. This was repeated several times, and lever always jammed when flipped180 with threaded end up.Teflon lube was applied, and compressed air used to distribute fully inside to section of movement, and made no difference.If I can get it apart, I should be able to see what is floating in the way.When jammed, lever can't be forced past what jams it. It has to be inverted to release, then lever fully functions.It's such a simple device, to become jammed so easily. Could be milling operation chip in the way, something simple.If tech can inform and show break down view, it would help. Thanks

I got this chuck to replace the current one on my compressor that was pretty worn out. It was easy enough to attach, and works well.

Plugged it in the air hose and it leaked out the end. If you look through it you can see light. I think they forgot to put the seal in it. Useless

Easy to use unlike hard to push and force leaver . It’s just squeeze lever slide in place , release lever and pump air .

Bought these to supply line pressure ~110 PSI to truck tires after mounting. Seemed as if it would be more efficient than my ball style clip on attached to a tire inflator clipped in the "ON" position. The twist on style seemed as if it could double as a deflator when not hooked up to an air line.The clip on was rather chunky but appeared to be well built until I hooked it up to an air line then it began leaking at the seam. At first I thought it may have been the valve stem but same result on other wheels and different stems. NOT something I expected from a brand new tool.The twist on works as a tire deflator if you don't have a valve core tool in your pocket or you have many tires to do but it's extremely slow. Inflation seems ok, no leaks but it's not very efficient when compared to the clip on style.At the end of the day it works and it's a lot easier inflating high pressure truck tires when you just clip it on and go to town instead of holding the inflator in place especially on the inner wheels. Only wish my clip on didnt leak from the get go.

A lot of these ball chucks are bad.These were fine

Great quality air chucks.. Used the Twist-on for my 12V car inflator. The threads on the original chuck got stripped and i needed a replacement. They're easy to align on the valve and they're easy to twist-on and off. Would recommend. Would buy again if needed. Wish I could've just bought the twist-on.. have no use for the clip-on.

Pistola manometro

The items look and feel well made. However; I was unable to use them as they were not compatible with my tyre inflator.

J'ai acheté ces raccords pour brancher en permanence un manomètre sur un vase d'expansion, et connaître l'état de sa pression interne.Mon précédent vase perdait sa pression d'air et ne faisait plus office de tampon de pression. Je n'étais pas tranquille car la pression dans mes canalisations montait de 3 bars à 7,5 bars quand la PAC du ballon thermodynamique se mettait en route pour chauffer l'eau. De plus, consommation d'eau non négligeable par ouverture de la vanne du groupe de sécurité.Maintenant, vase neuf plus un manomètre de contrôle de sa pression interne que j'ai branché avec les embouts Godeson me rassure.J'ai essayé les 2 raccords fournis un à clipser l'autre à vis, très bien, pas de fuite. j'ai préféré laisser celui à vis qui tient mieux.

The screw-on type is what I wanted for wheelbarrow and snowblower tires that have inner tubes that are pushed into the wheel when trying to attach the clip-on type. Both are well made.