Corsair CC-9011129-WW Crystal Series 460X RGB Tempered Glass Compact ATX Mid-Tower Case - White

This is for the corsair crystal series 460x RGB. As an overview this case looks gorgeous. It is a great build quality and very easy to build. Out of the box the case comes with all the screws you will need to mount all your components. My reservations with this case are short and not too important for the experience with usage. The layout is reasonably well thought out. The PSU cover also hides the hard drive bay, where you will find the included screws. The PSU cover is plastic and is of reasonable quality, however when wiring any USB ports, SATA cables, etc to the lower motherboard ports it can be a little fiddly to wire them up through the PSU shroud gap. However, the overall aesthetic pf the shroud makes time spent wiring the cables worth your time. I have a few reservations with the overall cable management of the build due to not too much space to hide cables. The case comes with some cable ties which are very useful to organize the cables, however it is a lot more useful using your own cables on top of that. Of course for those inexperienced with Computer building, you will want to check your motherboard has enough slots for the fans, and if not a 4 fan extender can be easily bought for around the £10 mark. Finally, the case comes with a SSD mount which is reasonable quality. However, just for cable management purposes i decided not to use it and i mounted my SSD inside the internal hard drive bay below my HDD, which seems like the more logical choice if you're using two or less drives. The quality of the SSD mount is not the best as the holders for the SSD's aren't the sturdiest, however it is just an extra which is not necessary. The positives of the case are numerous. The overall look of the case is amazing, and is very easy to install your components into. I, myself was only moving components from my old case to this one, which is a very big upgrade in terms of quality. The fans can get a little loud, but they have very good airflow, so you can just adjust the temperature graph in the bios options for fan speed. I liked the fans so much, that I also bought two additional Corsair fans, The ML 120 pro magnetic levitation fans which are very efficient and quiet. The experience with the case is amazing and with a little bit of time put into cable management, they will not get in the way or bulge either unlike my old case. I was also missing a rubber thumbscrew washer on the side panel thumbscrew, however I have spare rubber washers for now, and I corsair has sent a replacement thumbscrew washer for no charge very quickly. Their support was very good. This case is worth the price and is great quality. It is one of my favorite cases and still comes under an affordable price.

This case is great!It has plenty of space, looks sleek and modern. What else are you wanting? Ohh yeah.. RGB.The fans that come with it are pretty decent, although I'd rather you just didn't send any fans. As most people are going to go for the ML or LL series fans.Cables came a little messy in the case but that was soon sorted out. But one thing I didn't like was the fan led controller, as the instructions basically aren't there. I didn't know how to use it with all my LL fans, also needing the lighting node to actually get them working with corsair link was a pain as it DOESNT COME WITH THIS CASE.The included fan controller inside the case is.. well it's pointless, as I can't see anyone taking the back off just to change the settings when there's a controller included on the cases IO.The glass side panel is pretty frustrating to take off and put on as there's nothing there to catch or hold it. Even a tiny little lip to hold it there would be appreciated!The mobo standoffs came pre installed which was pretty nice, also seeing the middle one with a nub to hold it into place is a great feature which I appreciated.The PSU shroud is great however that gap in the middle could lose their edges so removing it is far easier, as when I needed to add a cable, I had to unplug everything that was poking through the hole to remove it. It's a pretty tight fit too, and what I mean by this is when you've got a 360mm radiator with fans on it, the shroud isn't coming out without a fight. You're gonna be bending and knocking stuff to get that out or back in! So put the radiator in first if using one, cause there's not much fitting in there.Plenty of cracks and creases to hide your cables along with a huge amount of holes to feed the cables through. Also a good feature to see is the case having tall feet, for when sitting on carpet.. The psu is still getting a decent amount of airflow.So it's pretty much an amazing case with just some minor flaws.

O melhor que existe!!!!!

Para quem procura um gabinete de qualidade e com uma excelente estética, compre sem dúvidas! Consegui um desconto ótimo com promoções de parceiros e pude ver a diferença de um gabinete comum para um gabinete gamer, de nível Corsair. O design do produto deixa o ambiente mais bonito e "tecnológico". O gabinete tem espaço para esconder a maior parte dos cabos e chama a atenção as 2 gavetas para HDD e os 3 suportes para SSD (atrás da placa mãe). O único contra é que só vem com 1 cooler com LED e outro sem led (traseiro) e o kit mais bonito da corsair (3 x 120 RGB) chega perto do valor do gabinete. Seria ótimo se houvesse a possibilidade de customizar a cor do led que vem no gabinete, mas acho essa ausência de customização faz parte desse mercado.

It looks amazing once you get it all together. The side tempered glass like to be installed in one position the best, just remember if top or bottom is in your left or right hand when removing. Installed a fourth Corsair SP120 RGB in the rear for exhaust and plugged it into the fourth port in the Corsair RGB controller behind the metal side panel, and it just works. Flawless.

Lots of room, looks beautiful, has great airflow. The fans run quiet and efficiently. The RGB and the glass looks VERY slick. Plenty of room in the case. This was my first build and I had no issues running cables.

Compré este gabinete porque quería ya mi sistema con RGB y mi antiguo gabinete ya me estaba quedando pequeño, un corsair spec-03 muy bueno para un primer armado pero algo ajustado la verdad. Después de ver varias opciones como el CM master case maker 5t y h500p, este fue el ganador por la calidad de construcción, materiales, estética y precio. Vi muchos reviews de todos los antes mencionados y creo que tomé la mejor decisión, este gabinete es hermoso pero tiene un detalle que mencionaré más adelante en sus pros y sus contras.Pro:* precio/calidad: está fabricado de muy buenos materiales y tiene excelente construcción y espacio.* estética* flujo de aírecontras:* los ventiladores rgb que vienen son muy ruidosos y no son PWM.* el panel de cristal del costado nos de detiene con nada después de quitar los tornillos que lo detienen, así que hay que ser cuidadosos.Un consejo extra que fue lo que hice yo en cuestión de los ventiladores, compré 6 ventiladores LL120 para tener RGB increíble, este gabinete ya trae un hub de 6 puertos para controlar el rgb, pero te hace falta el lightnode pro para controlarlo por software, que viene en el paquete de 3 ventiladores LL120, como mi motherboard es un poco vieja y no trae 6 conectores de ventilador, compré el commander pro de corsair, entonces así puedes comprar solo 6 ventiladores individuales y ahorrarte algo sin desperdiciar piezas como yo que dejé un lightnode y un rgb hub sin usar.