Conductive TPU Filament 1.75mm (± 0.03mm) 2.2lb (1kg) for 3D Printer, Electro-Conductive Flexible Filament, Black

1st time I have ever brought this brand, I been doing 3D printing for about 4 years now and I've used tons of different brands as you do!Although the winding of the filament is not that neat, it is still a good filament.It sticks fine and prints good with a nice even effect and has low odder.I used a Elegoo Neptune 3 printer and the Hot End temperature was 205 C and the Bed was at 55 Ci used a 0.6 mm Hardened Steel Nozzle. Time of print was about 10 hours at 40% printing speed.I had also used a hollow tree support for the front details of the eye and mouth. ( Cura 4.11 )So I would say if it is on a sale Like mine was then get it if you need a god Gray PLA.

Great filament overall, good adhesion, no stringing, no tangles and consistent colour while printing. Prints turn out well every time!

Prints cleanly

First print came out nice and as expected, 2-3-4, well, lost 2 (filament broke) third one was more fortunate, filament snapped as print finished, i could snap pieces off where it had turned brittle on a section

The lower layers are wrong winding. Mix and lock and the filament is broken during the print.

This is my first print in ABS, I don't know it's good or just acceptable quality, look photo. Absolutely no any warps or blobs, even no need retraction - Properly calibrated printer with settings 1500 acceleration, 60mm/s perimeter speed, Marlin input shaping with linear advance in place. 50C chamber , 250C hotend+100C bed.What I don't like - terribly smell, after this one print all day window open and still smell. I will try to buy proper filter, some carbon.

Fast delivery and excellent filament.

If you use the settings suggested flows like butter. Just warm the bed to 60 if you are scared of low adhesion.

This filament works great for my Flashforge Adventurer 3!

Very good

Mas complicado de imprimir que casi con cualquier otro filamento de fibra que haya utilizado.

I purchased some Red PVA from this manufacturer and I've got to say, this product prints both wonderfully and does *not* reek like cheese or whatever to the extent of some reviews I have read on here. There is a very subtle smell, which is different from PLA, but certainly nothing to get worked up about.I printed at 100mm/s @200C and 80C respectively on a PEI. First print came out perfectly; zero issues. This is my first time printing with PVB and could not have asked for a better result. I think some reviews here were expecting a PLA, thus all the convulsion.In conclusion, great product, no smell (its so negligible, unless your nose is practically resting on it?!), and definitely no issues printing with it. At this price, and especially if you're new to PVB like me, I highly recommend!I have a Mario hat sitting in an IPA vapour "enclosure" now lol.

I’m impressed, this filament works very good when polished the final result is the same as the photo, the only issue was the filament is wet and needs to dry for about 2 days after that it works great