GIANTARMMatte PLA, 1.75mm PLA Filament, 1KG Spool(2.2lb), Vacuum Packaging, 3D Printer Filament for Bambu Lab (Matte Blue)

The print quality on this was great in my opinion had not issue with the print. Zero adhesion issues and the color looks amazing.This was printed with my bambu lab a1 with a .04 nozzle and a .20 layer height with no supports there was very minimal stringing.I would buy this material againAlso I enjoyed that they included a resealable bag In the box to store filament in after use that was a nice touch

I bought this filament to make a custom, dark colored dragon for a client (pics above), hoping that it would give me the dimension and contract I was looking for in my project, as I had a lighter blue, glow in the dark filament that I needed something significantly darker than it, to really help this project shine... but I knew I did not want a black filament, it needed to be dark blue...Oh my, oh my... this navy blue filament by Giant Arm is yet another offering from the maker that I will be adding to my shelf of regular filaments. Opening the box, I knew that the color was exactly what I wanted and the end product was everything I hope for.Out of the box, this filament was (as always) very neatly wound, had no kinks or brittle portions of it, and it printed as cleanly as any of the best filaments I use. I really like the consistency of the Giant Arm filaments, it allows me to pop the spool into my printer and start printing with little-to-no (usually it's no) changes needed to my existing print profile. I did not experience clogs or moisture related issues when printing, and bed adhesion was a thing of beauty. At no point was I concerned whether or not this filament would stick to my bed; from the very moment the first layer was laid down, I knew my project was going to complete with any failures... something I have come accustomed to with Giant Arm's PLA.Pros: Great color, great bed adhesion, good price point, performs consistently across all their productsCons: There is only 1 set of filament holders on either side of the spool, I would like to either see one additional set on opposite side, or put 1 set every 90 degrees.

This is for Matte PLA light brown. I had a nightmare encounter with this filament on a Creality K1 Max. The filament was very brittle on first use in even loading it into a PFTE tube, with a hard bend and a break along the way. I unloaded the reel and ran a drying cycle in a filament dryer and loaded it again with better results and ran a few calibration prints. After picking the best settings and running one more drying cycle, I started a print. About 4 hours into the print, we had another break in the filament. I retracted, unloaded, and loaded in a good roll of PLA to flush things, only to find that I had a break and clog above the hotend with this product.I fully disassembled the hot end and tried to poke the clog out above form both sides with no luck. Over the course of a few hours I had to use a steel clog poke heated with a heat gun to poke and prod and made no progress until finally I heated the poke, forced it through above, and had to pull straight up to pull the clog up and out.This is the only filament I've had a clog with on this machine, across multiple vendors and types, and it was a clog of such annoyance and aggravation that I've tossed the rest of the product out and put this supplier on the never buy list.

Used the blue/purple/black filament for some dragons, a raven, and other small creatures. They were all absolutely gorgeous. The filament prints smoothly and did not have any issues with colors not lining up or funny streaks in the prints.At a craft fair the items printed with this filament were the first to sell. The blue was gorgeous in the sunlight.I have bought a number of other Kingroon dual and tri-color filaments, but this one might be my favorite.

When I get the itch to print but don’t want to spend too much money giantarm is my go-to filament. It’s priced good and the filament is great! I’ve bought many rolls before and never had any of them be tangled. Only issue I’ve encountered, is that the vacuum sealed bag is not always completely vacuumed but thankfully I have a dryer since I don’t print all the time.

Un silk davvero bello che crea un effetto di colori stupendo, le mie creazioni hanno una marcia in più. Per le importazioni di stampa non ho avuto difficoltà, ho stampato a 200°C e la stampa è andata liscia, ottimo grip sul piatto PEI, non è stato necessario aggiungere brim. Sono davvero contento del risultato.

The media could not be loaded. Avevo già tanta plastica da parte ma questo lo volevo provare. Ha dei colori stupendi, gli oggetti tondi mischiano le tonalità e oltre a rosso, blu e verde trovi sul pezzo parti viola, gialle, arancioni, il tutto lucido perchè il filamento è silk, e fa veramente un bell'effetto. Stampa molto bene, nessun clog o disturbo usando Orca Slicer.

The media could not be loaded. C'était ma première expérience avec la marque Giant Arm, et j'ai décidé de tester leur filament Gold/Rame bicolore. Je dois dire que je suis totalement épaté par la qualité exceptionnelle de ce produit ! Dès la première impression, la différence était notable. La qualité d'impression est remarquable, permettant de réaliser des pièces avec une finesse et une précision incroyables. J'ai également été surpris par la vitesse d'impression qui n'a en rien compromis la qualité du résultat final.Le rendu bicolore est juste top, offrant un aspect visuel unique et attrayant qui fait ressortir les détails des impressions avec un effet esthétique saisissant. La facilité d'utilisation de ce filament et la consistance des résultats obtenus font de ce produit un incontournable pour tous les passionnés d'impression 3D à la recherche de matériaux de qualité supérieure.

Sono rimasto piacevolmente stupito da questo filamento. Dopo pochissimi e semplicissimi aggiustamenti dei parametri di stampa non ha mai presentato problemi.La qualità di questo filamento è nella finitura, l'aspetto finale coincide (una volta tanto) con le foto, aspetto lucido e riflessi metallico-argentei. E' un filamento 'grasso' - temp intorno a 220, irrinunciabile heated bed almeno 70 gradi, meglio usare velocità bassa se hai dettagli piccoli. Non dà problemi di clogging

Das Filament lässt sich wunderbar mit einer gehärteten Düse drucken.Leider kommt es auf den Fotos nicht ganz so stark rüber wie es tatsächlich ist. Das Glitzer silber ist echt schön.Ohne groß an den Standard Druckereinstellungen was gemacht zu haben. Leichte Fäden aber das ist eher dem Objekt zu schulden als dem Filament.