🚗 Light Up Your Journey with Style!
The DUOFU365 Exterior Car LED Hood Light Strip is a versatile, dual-color lighting solution designed for cars, trucks, and SUVs. With a waterproof IP68 rating and easy installation using strong 3M adhesive, this 79-inch strip enhances visibility and safety while driving. It features a dynamic scan mode that switches from white to amber for turn signals, making it a stylish and practical addition to any vehicle.
Brand | DUOFU365 |
Color | White/Amber Switchback |
Form Factor | Strip |
Auto Part Position | Right |
Included Components | 1*Dual Color LED hood strip + 2*fuse tap adapters & 10Amp fuses + 1* Test pencil + 1* Hot melt glue + 1*User manual |
Connectivity Technology | Bluetooth |
Special Feature | With Start-Scan Mode, 3M strong adhesive tape on both sides, Rust Proof, IP68 Waterproof, Dust Proof |
Material | Silicone |
Water Resistance Level | Waterproof |
Remote Control Included? | No |
Number of Pieces | 1 |
Manufacturer | DUOFU365 |
Item Weight | 13.7 ounces |
Package Dimensions | 7.91 x 6.81 x 1.26 inches |
Manufacturer Part Number | DFUS-Y/W2M-Hood-FBA |
Special Features | With Start-Scan Mode, 3M strong adhesive tape on both sides, Rust Proof, IP68 Waterproof, Dust Proof |
J**L
Good for the price. My tester did not work.
It would have been nice if the tester worked but it did not. I had to manually find the constant and see if the power and blinker leads work. The adhesive is nice and strong and look is great. I do like the option of cutting at the marks and then you can easily adjust the center so that the LEDs can align properly. My issue was that I could not find good power source to tap into on my fuse box. Every fuse I tried kept the LED on until I tapped my blinker and used that power source. So that when I turn on at least my parking lights, the led strip will turn on, but the blinker will work even when off. I prefer it this way. Another good thing is that the unit has a dimmer feature built in so that if you can dim it to you preference. I do like you can shorten the blinker setting so that not the entire half of the hood is blinking, rather just the section you want. I measured it to about the lenght of my headlights. No resistor needed here either. No hyper flashing. Pretty simple install on my 2003 F150. Yellow is the drivers side and blue is the passenger side.To install properly, check to see if you need to cut it. I have a 70 inch and I could have cut about an inch or Two to install but I kept it entirely and tucked it under the fender sides of the hood. I did have to put electrical tape to mask the red 3m tape on top so that you do not see it peeking out from the hood. As for the wiring, the only issue is the blue wire lead from the passenger side. It is long enough lead but there is no way to tuck it anywhere other than the cowel. Just keep that in mind.The kit comes with pretty everything you need, but I would highly suggest wire taps to tap into the power (red) side of things, just because of what I encountered. I then zip tied the control module to the side of the firewall next to the drivers side fender. That way, I can easily acesss the control box and also tuck away any excess yellow and red wiring. The ground was just tapped to the car's hood and no tapping needed on that one.Once you do peel off the sticker and align your middle, I suggest do a test fit on the ends so that your strip will fit. Also it's a good idea to close the hood and see where the LED strip lands so that you can plan accordingly if you need to mask the top like I did. I do recommend this one and is like the other one you see. So it is pretty much the same unit. I just wished the tester would have worked. It would have helped to test out the leads.
R**T
Simple install
Easy to install and use. The only concern is how long the double side tape will hold up.
G**O
G
Sensacional lo recomiendo
B**B
Looks good, didn't last long
Looks great once installed. No marks for cutting down to size. Ended up tucking the excess into the front fender. Didn't survive the first trip to the carwash (all wiring was heat-shrinked and water protected. Might buy another to see if it will last longer, hopefully it will last longer.
M**T
Awesome product
The media could not be loaded. Everything works just like described, installation was easy looks great the brightness is bright enough to see during daylight I couldn’t use the blinker function I tested and they are working but VW uses the blinker for marker lights when lights are on
F**P
Works grea
The media could not be loaded. 2023 Hyundai Tucson HybridYou have to know what you're doing as the instructions are not that clear. Took me 2.5 hours to install, but great product.
D**E
Bright LED Light
I purchased this strip for under my hood for lighting when I have to work under the hood without overhead lights. The combination of these lights and a 12v switch worked perfectly!
B**L
Good
Muy buen produto funciona bien I intalacio facil
フ**り
うーん
白が真っ白じゃなくて残念です。写真じゃわかりづらいですがうっすらと緑が混ざったような残念な感じでした。スマホ操作で色変更はちゃんと動いていい感じです。白メインで使う予定だったのでなんともと言った感じで。。。。使い方考えます。
い**こ
まあまあかな
一番端のLEDが点灯しなかったので一部カットして使用しています。
ナ**ト
いい感じ
なかなか良いでさよ。
加**シ
俺の目が悪いんか?
130センチでカットして使いたく150センチ購入。どんだけ両面テープ剝がしてもカットの目印なんか出てきません。思ったより暗いしね。
M**S
Lights are no centered
lights on this is not centered they do not hold a pattern and they look ridiculous. Obviously the manufacturer does not give a crap about the problem because I've heard nothing back from my Note that I left
Trustpilot
2 days ago
2 months ago