iMBAPrice 2 Coupler Type Connectors Banana Plug Binding Post Wall Plate for 1 Speakers

I used these 2 coupler style connectors as a quick connect for my exterior speakers and they have worked really well so far!I have two exterior speakers with speaker wire coming inside through small holes. I setup shallow single gang boxes near their respective holes. I did this so it would be easy to reconnect a new wire if the old wire started to oxidize outside without having to rerun the entire speaker wiring from the amplifier's location. I used the bare wire connection method and have had zero issues; I do like the fact that it has connections for banana plugs as that could be useful depending on how your receiver is setup.Pros:-Price-Solid ConnectorsCons:-NoneOverall: I would recommend these if you are looking to add some speaker connectors and don't want to spend way too much for some of the selections in the big box stores.

These connectors worked great for running speaker wire through the wall. Using a double gang box, I added a pass through for the hdmi and optical cable. For the price, I bought the 5 pack. It was much more cost effective vs box store prices

I searched through the choices Amazon had on this type of product. This one should be described better (description states these are "iMBAPrice" brand, they appear to be unbranded. Anyways -Disappointing for the price.The 2 post wall plates really should come with a backing plate. The description makes it pretty ambiguous that it doesn't *(and the larger product does). So you MUST install a gang box. In fact, not sure why the product states it accommodates banana plugs on both sides "dependent on depth of gang box"? Again, for the price, the mounting plate should be INCLUDED.With all this said - this pricey product **requires a gang box** to mount to. So the description should say it that way. It only comes with the screws to mount it like you would mount a light switch to an existing switch box.The banana posts on the front, as pictured, are low profile, the jacks on the back are full profile. Thus, standard banana jacks on both sides are a questionable fit - if you place them on both sides, one side does not fit right (it pushes the other end out). There are holes on both sides to secure bare wires. You cannot disassemble these and reverse them so that the standard profile jacks are facing out front. The rear threaded nuts come off the front ones do not.

Worked very well and as advertised. The only (minor) complaint is that the screws for the overall plate are a bit prone to stripping, even with an outlet box specific screwdriver.It's been noted before, but the multi-binding posts are the same on both sides. I used the screw binding option on the back, which took a little bit of work to make sure the fairly low gage wires could fit into with touching, but the result is just what I looked for.

If you looking to clean wires up this is the plate you need I'm running a 11.2 system with 4 15 inch subwoofers so you will need a extra 4 channel plate. Other than that its good

Great quality install was easy

Like how many speaker outputs but they need to be deeper. You can’t fit the whole plug in both sides if you are using them on each side

Pros:1) - Shipped quickly and packaged well.2) - Snug fit with the surround/terminal plate. (See cons)3) - Terminals are very solid, mounted well, no issues there.4) - Great fit in a single gang box, hardware included.Cons:1) - Snug fit with the surround/terminal plate. It took me an extra 5 minutes to work the terminal plate into the surround once on the wall but not worth losing a star. Although choice words were said, I am now happy with the fit.

Able to use pins or connect wires directly

Worth the price

that's exactly what I expected

新築の映画鑑賞用に後方スピカーを移動式にしました。Dolbyなどを楽しむため急きょ仕様です。設置は大工さんに取り付けてもらいました。壁に違和感なく収まってます。

迅速な対応ありがとうございました。梱包も良く商品も満足しています。また機会があればお願いしたいと思います。