Croydex AD116441 Square Section Shower Curtain Rod With Rings Maximum Length 2500mm Chrome, Silver

The poles very lightweight and the connection in the centre makes for a good tight fit. The end parts that attach to the wall have a good weight and all the parts are solid with no plastic. My only real negative would be the pole does tend to sag a small amount in the centre. In one review I read about twisting the pole up a fraction, which seemed to reduce the amount of sag.

Looks good, a bit fiddly to fit (tiny grub screws) and with a disappointing design flaw. BUT it's fixable. No matter waht you do the rail will sag in the middle because the wall brackets are not robust enough, but I liked the overall look over my bath so I bought a stainles steel eye to attach to the ceiling and a stainless S-shaped hook, both from Fleabay. Then you can attach the eye to the ceiling directly above the rail around 2/3 of the way from the shower end and use the S-shaped hook to support the rail and stop it sagging - I bent it to suspend the rail just the right distance from the ceiling. Worked very nicely. I spent a little bit more money but now I have a rail I can have confidence in. The eye and hook in stainless look like they might have been designed for the rail. So often manufacturers get it so nearly right but not quite.

I bought this to replace a shower screen which broke. I like the idea of it curving outwards and it does indeed give more space - I hate it when the curtain sticks to you! It was straightforward to fit, and looks nice. It does dip slightly in the middle when the 2 poles join but that's not an issue really. I would recommend this and as it was on offer when I bought it, I was chuffed!

Overall, this is great product....well, as excited as I can be about a shower curtain rail.I was a bit surprised with the weight of the rail, I was expecting thicker and heavier but it is good. The fixings are very good quality. I have a P shaped shower bath with a glass screen, the screen isn't long enough and I end up with a wet floor. I fitted this above the curved glass screen, following the curve and tailing off towards the inside corner of the bath. Fits perfectly...very happy.

Curves nicely to fit over a bath on two corner walls of a shower. Wanted a rail that was sturdy enough to stand on its own without having to also screw it into the ceiling. Wanted to avoid buying a heavy shower glass screen too.This is lightweight and looks stylish. Cleverly hinged at both ends so it effectively swings and tapers to the walls once cut to size and mounted.Wall fittings are great and secure but care must be taken at all times not to scratch the rail - so best to fit it with a friend holding it up and use masking tape temporarily where the rail meets the wall ring until it’s in place.I was able to fit it alone with great care and having read other reviews that gave great hints. It looks good and sturdy enough although need to remind others in the house never to hang anything on the rail.

We replaced a sliding shower screen with this rail and a curtain, should have done it years ago.

The media could not be loaded.  When you cut it to the size needed, it looks unacceptable

The curved rail holds the shower curtain away from the person showering, giving more space to move about. Looks very smart, like the design. Only minor negative is that the L-shaped part of the rail drops slightly from horizontal as there is a small amount of room for movement in the wall fitting and the weight of the shower curtain hangs here when not in use. This could be avoided by slightly rotating the circular wall fitting clockwise from vertical when fixing to the wall. Since I have fitted it vertically, I am going to place a small wedge in the gap where the rail passes through the fitting ring to see if this keeps it level.