60A SL V2 Tamiya Plug Brushless Speed Controller ESC for RC 1/10 1/12 Model Racing Car Truck

Replaced an old Hobbywing 45 amp with this. Seems just as fast and no issues so far. Programmed with a Hobbywing card and I'm running a 3900KV in a tenth scale sedan. no heat or glitching.

I tried this ESC out because of the price. It worked great for a month or two then I had some problems. After taking some jumps it would randomly stop running or just start to shutter when I hit the throttle. The more I used it the more issues I had.

this product worked great and handled 3s like a charm. i would advise not running it too hard as it may over heat. the programming feature was great and easy to use, with a wide variety of options. my only problem was one of my transistors blew out witch comes from quality management and component selection, would i buy again yes but not for a 1/10 scaled monster truck.

The unit I received worked fine it seemed, but about two minutes into running my car the steering stopped working. I checked to see if the esc was hot, it was not even warm. I turned the esc off and back on, steering worked again for about 2 minutes. And repeat. Replaced servo, same problem. Most likely not getting enough voltage to the servo from the esc. Also its not a big servo, small servo on 1/12.

Stock plung is to small for most motors but do come with extra plugs

Well to start it came well pacaged on time with insulation foam. I've had this esc for a just about a year and it works amazing the instructions are clear and easy to understand... DO NOT GET IT WET.. never get your brushless esc wet they explode each time. Other than that there is nothing wrong with it and I wouldn't improve anything on it. It stays cool and never is hot. I have had it in 3 RC cars and I now have it in a boat. I will say make sure to read the instructions on this thing before you even plug it in. That should conclude this reveiw thanks 👍😊

Works very well. I am using it with a brushless 380 in a F1 car. Only using 2S.

Upon recieving the hobby power 60a slv2 esc and unboxing I installed in my daughter's 1/10 scale 2wd Traxxas Stampede along with a Hobbywing 3800 kv motor. The esc looks identical to the real Hobbywing esc but that is all that is identical. The esc came with no instructions and no reverse programmed out of box , no big deal I used my HW program card to set up esc with no issues. Running a 2s lipo at lower speeds this esc lasted about 10 min before it fried. Now just to clear things up i am a experienced r/c enthusiast with over 25 yrs building and racing r/c's so i do know what i am doing, we ran in a indoor arena so weather or moisture was not a issue. When i went disconnected battery from the esc it was super hot and leads almost melted. I installed another esc I had and it ran fine again, bottom line, either I got a lemon or these esc is junk.UPDATE 2/23- changing from1 star to 4 based on the best customer service I have ever received from a Amazon seller. Seller sent me a email with in two business days of posting my review and are sent me a brand new unit and also offer a refund. That experience alone will give me no hesitation about purchasing from seller again.