NEU MASTERBrad Nailer, 2 in 1 Electric Staple Gun/Nail Gun for Wood, Upholstery and DIY Projects, 1/4'' Narrow Crown Staples 200pcs and Nails 800pcs Included

Excellent! I bought this specifically to install baseboard with 2" nails in 5 rooms. It did a superb job. It has a round knob to adjust the power or depth the nail or brad is being hammered in. I prefer to have it driven in such that it is a bit below so I can use caulk or compound to fill and make it even and then paint so it is undetectable after the nail is drive. It comes with an assortment of different nails but no 2" nails which I bought inexpensively separately. It is compact and easy to handle. Nails are easy to insert. Attach a 20' extension cord and access to an entire room is easy.

Works very well

The media could not be loaded. This nailer does not live up to its specifications say it will drive a 1 1/4 inch Brad into trim, I took it on a job to install trim started on level 5 and it would not drive Brad flush turned up to 7 and it would still not work properly I took it back to the shop and used the brads that came with the nailer same result brads we left about 1/16 to 1/8 above the surface tried 3/4 brads same result. Contacted Amazon they suggested I contact the vendor which they said send in a video, which I did e - mailed and text as of today 3/13/25 I have not received any response 2/17/2025. I would strongly suggest you not buy this product for 2 reasons 1 it does not preform close to specifications and to customer service is 0.

I wanted one of these forever. My husband finally bought me one and it’s sooo heavy. But I still love it

The amount of power from this corded product is really limited. It feels more like its battery powered. The fact that you have to use a dedicated outlet and a short extension cord, as some stated, indicates a weak design. Even with the juice of a 10 or 15A circuit, it's still under powered. Best to use on soft, engineered boards like mdf or maybe particle board. 1 1/4 brads made it maybe only halfway through pine. Unfortunately for me, I held on to it a long time before I tested it out. Can't return.

I got this in order to install a runner on my oak stairs with crown staples. After reading review I was a little concerned about a lack of power, but due to the price decided to give it a try.Some previous reviews mention the importance of using a short extension cord and outlet whose circuit breaker isn't using any other power.Very true! I started with a heavy duty outdoor 12ft long extension and staples would not fully penetrate the wood treads, realized I did not need the length and switched the extension to a light duty indoor 4ft extension and what a difference! Staples went all the way in (once every 10 or 15 shots one would need to be hammered a tad- but I expected that with the cost...and it may have been technique).But I would not recommend if your job will be a significant distance from your outlet- I am guessing 10-12 feet (a 4-6ft extension) is safest.

Electric brad nailer for a project I had planned. Well right out of the box it started jamming. When I went to disassemble the head (easy enough to do) it literally exploded sending parts all over the place. What I didn't know was I should have removed the brads from the magazine before disassembly. The spring force blew all the brads and head parts out of my hand, so I wasn't able to observe how it was put together or how many parts were involved. Finally managed to figure it out after a couple of errors in reassembly. Even after this the gun continued to jam and shoot multiple brads at once causing more jams. By now you are probably why my 5 star rating. This is the reason. Through all this I contacted Spartatools csAnd they consistently got back to me within 24 hours. They walked me through aal the procedures and even sent pictures of correct assembly. We then swapped a couple of emails to figure out the jamming issue, again with pictures shared back and forth. In the end we couldn't get it figured out so they said they would send me a new unit and don't bother sending the old one back. Two days later the new gun is here and working well. I have been shooting 1.25" 18ga brads into 7/8" boards and using the proper two hand method it sinks the brads flush on the highest setting. Good tool.

I got this because I don't have an air compressor and my home improvement budget is really tight. I needed a nail gun for some odds and ends and this barely is worth the money. With 1 1/4 or 1 inch nails about a quarter inch is left sticking out of half inch oak. I had to go over every nail with a nail set. Annoying, but not completely unexpected based on some of the other reviews.It works just well enough that I won't return it. Easy to use, cheap, and just not strong enough to drive nails into hard wood. If you plan to use this with pine or another soft wood this might work better.I'll be using it on some softer wood soon so I'll update this afterwards.I should have known better than to cheap out on a power tool and just waited till I could have gotten something better.***Update***I took me a while, but I did use these on some softer pieces and it did work much better. This tool is useful enough for me that it'll have it's place in my toolbox, but I will definitely look into a more heavy duty unit in the future.