JLJThermal Pad, Thermalright Silicone Thermal Pads 80x40x1mm, High Temperature Resistance and Non Conductive for Laptop Heatsink/GPU/CPU/LED Cooler (1MM)

Very good thermal pad, easy to use and very good cooling performance... I can only recommend it to everyone, my graphics card is 5 °C cooler than the standard one.

Pads were able to be cut, and didn't fall apart or crumble!

Outstanding thermal conductivity. Used 0.5, 1.0 and 1.5 mm on SSDs and 0.5 and 1.0 mm for RAM modules for consistent contact to heatsinks.• Works in conjunction with heatsinks to lower temperatures by 15-30° C• High 40s / low 50s without heatsink and internal fans at constant 3000-4500 rpm• High 30s / low 40s with thermal pads, heatsinks and fan on factory auto settings of 0 to < 1900 rpm• High 20s to low 30s on idleFlexible, tacky on both sides. Thicker pads are sturdier and easier to apply. 0.5 mm prone to tearing. Use point / thin edge of razor / craft knife to lift pad away from stiff clear film. Apply to component. Use point / thin edge of razor / craft knife to lift thin flexible tinted film away from thermal pad.Well designed packaging of polypropylene card box in sealed foil pouch.Results will differ based on undervolt / overclock, fan settings, choice of heatsinks, work load, and temperatures (ambient, boot, CPU and GPU), and etc...Enable power efficient features to optimize thermal management and thermal pad effectiveness otherwise the constant power draw will quickly drive up temperatures for all components. Heat radiating from CPU and GPU will drive up SSD and ram module temperatures.Vacuum fans at 2600-2800 rpm help maintain stable temperatures and are much quieter than internal fans.Update 1: Thermal performance under different thermal management settings and CPU load:No thermal pads or heatsinks, internal fans = 5000 rpm, no vacuum fansSSDs 31-72° C; CPU cores 38-86° C, avg 4.1 GHz, > 3 hours each over 7 daysThermal pads 1.0 mm + heatsinks, internal fans auto = 0-2513 rpm, vacuum fans offSSDs 26-45° C; CPU cores 40-79° C, avg 4.1 GHz, > 3 hoursThermal pads 1.0 mm + heatsinks, internal fans auto = 0-1875 rpm, vacuum fans auto = 0-2600SSDs 32-46° C; CPU cores 43-81° C, avg 4.2 GHz, > 12 hoursThermal pads 0.5 mm + heatsinks, internal fans auto = 0-1875 rpm, vacuum fans = 2600 rpmSSDs 28-45° C; CPU cores 40-67° C, avg 4.3 GHz, > 6 hoursThermal pads 1.0 mm + heatsinks, internal fans auto = 0-1875 rpm, vacuum fans = 2600 rpmSSDs 26-43° C; CPU cores 38-70° C, avg 4.1 GHz, > 27 hoursThermal pads 1.0 mm + heatsinks, internal fans auto = 0-1875 rpm, CPU vacuum fan 2600; GPU vacuum fan = autoSSDs 33-45° C; CPU cores 45-73° C, avg 4.3 GHz, > 3 hoursThermal pads 1.0 mm + heatsinks, internal fans auto = 0-1875 rpm, CPU vacuum fan auto; GPU vacuum fan = 2600 rpmSSDs 26-48° C; CPU cores 41-79° C, avg 4.3 GHz, > 35 hoursThermal pads 1.0 mm + heatsinks, internal fans auto = 0-1875 rpm, vacuum fans = 2800 rpmSSDs 26-45° C; CPU cores 38-74° C, avg 4.1 GHz, > 22 hoursSystem settingsUndervolted laptop CPU core and iGPU, and slightly overclocked CPU cores while limiting power draw, which helps keep cores generally below 76° C despite running at 4.3-4.6 GHz during near constant load. GPU undervolted and overclocked to > 1900 MHz with VRAM + 115 MHz. DDR4 overclocked from 3200 on 1.2 v to 4200 on 1.1 v. Internal fans on auto, generally 0 to < 1900 rpm . Vacuum fans at 2600-2800 rpm.

It came quickly and was easy to cut and place on my gpu chips with out stretching or falling apart also made a huge difference in temperature on my nvme ssd definitely would buy more when needed

Pad thermique d'une efficacité exceptionnelle posée sur ma carte graphique, tourne en Idle à 32/34° et en burn je ne dépasse pas les 55/60° nickel, je recommande à 100%, cela deja trois, j'en commande merci.

Made a huge impact on hotspot temperature readings on my 3080Ti.I used 2mm for the VRAM, 1mm for the things around the VRAM, and 3mm for the pads on the back. Works wonders. 😊

al giusto prezzo un buon pad termico siliconico che non si secca facilmente diversamente da tuti gli altri ce dopo un po' si sgretolano e tocca cambiarli dopo 4 mesi

Item was well packaged and they provided cleaning and drying wipes for the installation. I am well satisfied with my product.