Xprite 4" Inch LED Fog Light Mounting Bracket Adapter for 2013-2017 Jeep Wrangler Hard Rock, Rubicon X, 10th Anniversary Editions

I was able to easily install my stock flood lights from my Sahara onto a steel Rubicon bumper.

Used these to install MOPAR LED foglights on a MOPAR Steel Bumper for my JT. Worked flawlessly, no modifications needed. A1!

Works well with 4” fog lamps for special edition Rubicon bumper! Con: the slit where you put the screw could just be a hole for the screw instead of sliding space for a better fit.

Works very well, but needs to come with appropriate washers to help prevent the small bolts/screws that attach to the fog light from eventually cracking the plastic light housing. I retrofitted some washers but two did require grinding a corner off to get them seated properly. Other than that tip, these work perffctly so far.

Needed an “adapter” to install 2018 JLU Sahara factory LED fog lights into a Rock Slide Engineering (RSE) front bumper. These were specifically recommended by RSE so I opted for these as opposed to spending another $150 to $200 for aftermarket lights plus a separate wiring harness when the OEM lights and harness were essentially free at this point. Only problem in my case was the brackets had to be shortened by about 3/16” to allow the lights to align with the 4” holes in the bumper. Nothing a cutting wheel and some paint couldn’t fix in 10 minutes. After this shade tree engineering I have fog lights right where they need to be. Well designed product. Good finish. Nice they come with fine thread machine screws to attach lights to the brackets.