ST2-2.5/2X2 Twin Spring Terminal Block Push in Type PT Screwless Wire Din Rail Connector 30 Pcs Set

I didn’t know all wire ports have continuity between. I thought it was 2 conductors separated.

Part of my boat rewire project. I prefer spring clips to screw terminals because of reliability under vibration and lets face it, boats do a ton of skaking and vibrating!These worked very well. The kit is complete with shorting links, end caps and end blocks.The only thing I didn't like was the poor plating on the internal links as can be seen on the photos of the product. I'd prefer fully plated to prevent corrosion but these will work if placed into a seal enclosure, which is what I had to resort to.Since the product doesn't even state they are plated its hard to complain, but the fact that parts of it are plated and others are not is disappointing. It looks like they plated the material first then cut it exposing the unprotected copper.Other than the plating issue, this suited my needs well. They are easy to use, hold well and the connection made electrically is good.

Bought some due to supply issues. Boss now doesn't want to use anything else.

I wanted to like this product, and the similar one from the same manufacturer. The spring terminals are good, and the DIN rail attachment works well. Unfortunately I wanted these specifically so I could be common buses, and was counting on the shorting block jumpers to work. The jumpers do not fit right; they are either impossible to seat in, or are so loose that they make intermittent contact. I cannot recommend this product, and won't be buying from the vendor again, unless or until they make significant improvement to the shorting jumpers.

Every thing was good. Wish they included a piece of mounting din rail.