⚡ Elevate Your Ride with Precision Engineering!
The JT Sprockets JTF1263.16 is a high-performance 16T front sprocket made from SCM415 chromoly steel alloy, designed for durability and precision in motorcycle applications.
J**D
Great product. Made a huge difference.
This sprocket made my XT 225 more usable across the board. 2nd gear is great off road and I don’t shift to 6th until 50 - 60 mph now.
J**S
15 minutes to install, and now my 1st and 2nd gears are actually usable in town, and 6th gear becomes a cruising gear
I put this sprocket on my Yamaha XT225 to replace the 15 tooth sprocket in order to get a little more use of 1st and 2nd gears in town. It took about 15 minutes to swap the sprockets out, and for $15, you cannot get a better bang for your buck. Still have plenty of power, and now 6th gear is like a cruising gear.
A**S
Works great for the XT225!
JT doesn't list this on their website for fitment on the XT225. It does fit! It has the two holes to secure the threaded bolts on the XT225 and the offset is exactly the same as the stock 15T counter-sprocket: Perfect fit! It makes 1st & 2nd gear far more usable around town, and turns 6th gear into an "overdrive" on the Highway, assuming you are running flat or downhill, and your total rider weight is not near the 409# weight limit! ;-)
R**E
Does not last
The first image is the JT sprocket after 3,000 miles of riding. The second image is the oem sprocket with 12,000 miles. You can see the the JT sprocket has wear on the inside where the sprocket slides over the output shaft. I could feel this on the bike especially when downshifting and applying throttle (felt like slop). To me this is unacceptable for a 20hp motorcycle (xt225). I could feel this slop with my hand when I took the JT sprocket off.It also has terrible corrosion resistance. I coated this sprocket in Dow Corning D-321R at initial installation and after 2,000 miles which has work well for me in the past. I lube the entire chain every 300 miles or so with bel-ray chain lube. I know this sprocket is cheap but I will never buy JT sprockets again for any of my bikes.
D**.
Exact fit and inexpensive
Inexpensive sprocket for my 1992 Yamaha XT225. One tooth up from factory to help with highway RPMs.
A**R
Fits as promised
Works great
D**R
Great replacement
The up gearing to 16 tooth on my yamaha xt225 make all the difference for gearing on this bike. first is now useable and 6th hits 65 easily. install was as clean as the Original. good product
J**M
works great, no complaints
solid gear, well machined, works great, no complaints.... very easy install...
Trustpilot
3 days ago
2 weeks ago
