Elevated Auto Styling- Rear Middle Window American Flag Decal Fits Ford F150, F250, F350

First off, I followed the directions step for step.... I know, a man following directions, rare. But, again, step for step. First problem I encountered, was the instructions state to apply the “Top half of the decal first”. Well, when I opened the package, the decal backing was split left and right, not up and down. Not a huge deal, I proceeded. I started with the left side first, proceeded to the right. All seemed to be going well. Second problem.... the decal didn’t stick! I started peeling from the right side, and none of the stripes wanted to stay. Kept trying, nope..... had to remove this thing a trash it. I hate this because I was really looking forward to this decal...

Came out perfect! I sprayed the glass with window cleaner to align the decal where I wanted it. I used the supplied squeegee to work out the window cleaner and soaked it up with a paper towel. I let it sit in direct sunlight and worked the backing off. A heat gun or hair dryer works well in colder climates. This takes patience. Once the backing is off, use the squeegee lightly to work the remaining window cleaner from under the decal. A credit card works great for this. Be patient, take your time, and it will turn out well.

Installed on my 2015 F150, I had to order one because my buddy had the same one on his truck and I loved it.. install was pretty straightforward, basically start in the corner and work around from there... I didn't have rubbing alcohol so I ended up using dish soap but as long as you have the glass clean and dry I had no issues at all adhering.. can't believe how spot- on the decal fits, after multiple car washes and opening and closing the window it is still holding on so seems to be a high-quality product. Thumbs up!

Decal went on great just like all other decals of this kind. Instructions were good, place the decal on the window prior to peeling off the backing so you can see where you want it and kind of eyeball it while applying. Peel off one half of the backing, get it in place without touching too much of the adhesive side to the window. Once you get it in place use the included card to work from the middle out, up and down, leaving half the backing in place. Once one side is in place, repeat the process with the other side after you peel off the backing. Leave the protective outer layer in place and use the included card to scrape the decal from the front side to ensure adhesion. Once done, peel up a corner and slowly remove the outer white layer, paying close attention to work broad angles so you don’t peel a corner of the decal. Total install took about 5 minutes after I cleaned the back glass. Last picture was indirect sunlight with significant glare. Perfect.

I’ve been eyeballing this thing for a while. My daughter one day “Dad I wished there was an easier way to tell your truck from others when picking me up from school.” Bam ...my reason to buy this for my 2015 F150. Just line up before install. I usually use painters tape to help me hold on place. Keep your hand on the decal while you peel behind the other side... From the bottom middle peeland press outward pressure. After you have one side adhered do the other side. FromThe middle to outside pressing down to remove air pockets. Go over it again. Peel off the backing paper. I hear someone complain about the half star. That’s the design where the edge begins.....It’s correct. Buy it and use your brain installing. Looks good.