Titan Fitness T-2 Series Short Power Rack, Skinny Pull Up Bar, Pin and Pipe Safeties, Standard J-Hooks, for Home Garage Gym Weightlifting and Strength Training

This is a great rack for basement lifting! I have it anchored down on a homemade platform with 2 in structural lag screws and the rack doesn't move when lifting heavy or doing pullups. In my opinion this is the best rack to buy if you are limited on ceiling space (80 inches from my platform to the ceiling). Also, the rack has an amazing value with the number of attachments you can add to it, which is hard to find for $400. The steel, hardware, J-hooks and safeties are all excellent quality and make lifting much safer. As mentioned earlier a huge plus with this rack is the ability to bolt it to the floor or platform. Was using a cheap Amazon squat stand I found for free, and it was very unstable for weights over 300lbs, so I replaced it immediately with this rack and I am glad I did!After doing some research, those who are adamant for a 3x3 11ga short rack, Bells of steel sells a 72in variant for $1200+ (w/o j hooks, safeties or bottom feet)

It was so hard for me to find a rack that would fit in my low ceiling basement that was also durable. This is all I was looking for, every penny spent of this was totally worth it. Very sturdy, I can do pull ups and hang around the rack no problem, I don’t feel it flimsy at all. I’m a short person so the size it’s perfect for me, maybe if you’re tall, you should get the bigger version. But will keep buying titan equipment for sure. Instructions pretty straight forward, just make sure you have your own wrench bc the one that comes with rack is absolute garbage. Overall highly recommend.

I love it! For anyone trying to build a home gym with limited space and on a budget, this is perfect. Solid and reliable!

I’m 5’8”, ~260#, long-torso & short-limbed. A human dachshund.Short review: If you are getting this for squats and/or pull-ups, and if you are taller or not a dachshund build (T-Rex on a good day), go for the Titan T-2 tall cage. If you’re 6’ or more, you probably need at least a 90” tall cage.If you’re primary focus is bench, this age should be fine for any height, as long as you’re ok ducking walking into it.If you’re ok with starting your pull-ups seated on the floor, then y’all talk folks will be fine, just remember to duck.It arrived in a thunderstorm, abandoned in front of my apartment building to soak up rain and bugs. In spite of its ridiculous arrival and torn cardboard, the pieces were clean, intact, and dry. They toss a lot of silicate packs in the box, so I opened the packaging in the hall and wiped everything down before bringing it in because I hate vacuuming. And dirt.OCD aside, the items were well preserved for a rapid shipping world; however, I did not get an assembly instruction page(s) and had to find it online. You’ll also notice that the 3 super vacuum sealed cards of nuts and bolts are (mostly) unlabeled. At least one had its assembly number on it, which made it easier to figure which was which. I’m a set up everything first guy, so the two hours it took to build included the time to find the manual online, open the nuts and bolts, number each card, sort the metal beams into a more useful array.Once together, I added the Yes4all weight holders, and used the yellow clamps to hold the weights in place. I’m not worried about them falling off, but I work odd hours and workout very late, so the plates now won’t rattle and bother my neighbors. The dip attachments are also nice and, since they aren’t the rotation into lock type, they can be put up by the top or bottom, or next to any other attachment and cotter pinned in place. The weight arm also holds the coiled battle rope away from the claws of my 8# furry poltergeist (cat).Note: putting the top rear logo beam in place was easy as soon as I realized I could rest it on top of my granite skull while putting on the washers and nuts. After I misjudged and banged it off my knee. The rear beam was the only fighter, the top side beams could rest on the first two bolts without falling off.Last: I ordered a set of number stickers for the holes. I don’t want to count every time I move something. Just a four pack of 1-25 should cover it or at least plan to make yourself some way of marking the holes. Paint lines, stickers, butterflies, whatever makes it easy to track where you’re moving the J hooks, spotter arms, dip attachments, cat climbing steps, whatever it is.

Arrived in great condition, no dings or dents or missing parts. No assembly instructions though. Assembled by myself easily using the provided wrenches, which suck but do get the job done. I ordered a pair of small monkey wrenches for whenever I next have to deal with the screws and bolts, you will definitely want to have some real wrenches handy beforehand.The rack is solid, no wiggle, no wobble. Holes are not numbered, used strips of duct tape to mark preferred heights.

The rack is fine, I have no complaints about that. However they don't include a paper manual for assembly. Instead they make you go on a broken QR code, google odyssey to find the right manual for your product, and all the racks look similar so it's harder than you might think to find the right manual pdf online. For all the money I spent on this, you think they could have spent a few cents to include a paper manual with the product to save the customer a big hassle!

I needed a shorter rack to fit in my basement with low ceiling, so this is a perfect fit.The rack arrived well packaged and assembly was simple & quick.After a couple weeks of use, this looks to be more than rigid and sturdy enough for my needs.Great product. Highly recommended.

All the parts were packed well with styrofoam. The included tools are useless you need your own wrenches. Assembled by myself in about an hour.