Grease Monkey Fingerless

They're lighter gloves, meaning you can get into tighter spots (great for a mechanic) but also have sturdier thinner materials to protect your knuckles, wrist top (the spot you usually slam when you finally loosen a tough bolt) and the full palm area.I've used Grease Monkey gloves throughout my life. In my teens, in my 20s, and now in my 30s. They are a very good quality glove and will last you a while depending on how much abuse you cause them.The price point is good on the wallet, and you shouldn't need to replace them more than every 3 months. Again, that's if you use them constantly (high wear and tear). Considering, many gloves can't handle high wear and tear for more than a month and need to be replaced sooner.I highly recommend these gloves since they're great for protection but also allow you to do more intricate jobs due to the fingerless application. Couple it with some 6-9mil nitrile gloves underneath and you'll be golden for almost any job.

These gloves are serving me very well. Great quality and low cost. They were slightly small when I got them. Not uncomfortable small but tedious to take off. However they've loosened slightly with use and are perfect for me now. They allow good dexterity but still protect my hands and knuckles.Also worth noting, they have not stained my hands at all. Something I've experienced with many other brands.

I bought these gloves because I work in a Print Shop. So I handle a lot of paper and it's not only rough on the hands but a lot of paper cuts happen and I wanted to reduce the number of paper cuts I was getting. That was when I decided to look at getting some fingerless gloves and after looking over many types I decided to buy these. They just look great and functional and are made for mechanics who work with their hands and I work with my hands a lot. Now, once I got them, I instantly loved them. They fit great and are not too bulky. I usually wear large nitrile gloves and went with that for sizing and am glad it worked out. In the print shop I am moving and cutting hundreds upon hundreds of pounds of paper, as well as, wooden pallets and boxes. I operate a large industrial paper cutting machine called The Guillotine made by ITOH and I have to load and unload the paper from it after cutting. And so these gloves have really been worked. And I thought everything was great with the gloves until the third day. That was when I noticed that the fabric was separating from each other. Almost like it was worn away. It didn't last 24 hours of work. Now I have to think about returning it for a replacement or for a refund. I really like the fit and style but I don't want it to just wear out like that again because of the fabric type. It's like a cheap terry cloth spot on the back of the thumb. EDIT: I had the gloves replaced and now that the holiday push is over the workload has not been so crazy and these gloves have lasted longer than the first pair. Looking at this glove it is constructed from great material except for that one strip that runs along the back of the thumb. I also got part of it wet unintentionally and the dye transferred to my hand which was weird. I tried washing it but the dye eventually washed off after a few days. Still, a good glove that I have recommended to my friends and coworkers.

I purchased these as an aid to keep me from aggravating my moderate trigger finger condition by helping to discourage me from clinching my fist while sleeping. They work well for that. They are very comfortable and supportive. They do not cut off circulation if you buy the correct size. Measure your hand as per the instructions indicated in the product pictures to select correct size.I don't think these gloves would hold up as true mechanic work gloves for very long because they are fairly light weight albeit they do have thin reinforcement pads sewn in the palm and back of hand knuckles. If you want strong work glove spend another $20 and upgrade. Like the saying goes, "you get what you pay for".

I buy these for weightlifting in the gym. They’re great padding and last longer than any expensive workout glove out there for me

Working around wood shop equipment and sharp edged hard wood these gloves have worked well.Have a pair that were used every day for the last year and will need to replace - only reason is due to the Velcro is starting to not hold the cuff closed as much as I prefer.The Velcro back allows for closing the cuff end to prevent sawdust from entering the glove. the fingers are snug but not too tight and for good finger dexterity which is great when working around shop equipment. found they help in keeping fingers mobile and warm in above freezing shop area. I do not recommend using in wet conditions or any leather glove in wet areas.

Love these gloves where them five to six days a week for work. They are form fitting and generally last me a month. I give the gloves themselves a 5 ⭐. The reason I left a low rating is the 4 pairs that i have purchased off of Amazon have been inferior quality compared to ones that i have purchased from other retailers either big box or online. The ones that i have purchased off of Amazon only last me about 2 weeks and all fail in the same manner, the hook and loop closures start disintegrating and the stiching on the index finger pads starts coming out. I don't know if this was just a bad lot at Amazon or knockoffs being sold as original but save yourself some money and spend a couple more dollars elsewhere and get a longer life out of the gloves.

Fit well and have held together at work for a couple months now

It is good fit and does the job. I drive a city bus and need good gloves to mitigate the impact from holding that steering wheel all day long. I don’t know if it reduces any vibration but I do get a good grip on steering wheel with these gloves. However, there is slight quality issue with these gloves, I used them for three days in a row and the second day the hook and loop started coming off. Seems like a bad thread but that’s what it is for now. Other than that wear and tear has been started already as you can see in pictures. I think these are not great for driving. I got them because they have impact protections on palm side of hand and again I get good grip with these gloves.

Son muy cómodos y desde luego muy prácticos para trabajar

LA calidad es buena el diseño me gusto mucho en cuanto a la talla esta un poco reducida, pero bueno eso pasa aveces con las compras en linea, estoy satisfecho con este producto, si lo recomiendo.

Buen producto y muy cómodos para manejar