IP65, 12V Waterproof Flexible LED Strip Light（Power Cord not Included）, 16.4ft/5m Cuttable LED Light Strips, 300 Units 3528 LEDs Lighting String, LED Tape(Blue) Power Adapter not Included

Yep, it lit up my stuff. Easy to work with and quality seems good. I'd buy it again.

I purchased these to install under a homemade cabinet. These have only been used indoors so I cannot speak to their IP rating or their UV resistance as others have noted there may be concerns in those areas. For my application, they work perfectly. They were easy to install and soldering wire connections to a switch and 9V battery was simple. The adhesive was a bit lacking when applied to the pine cabinet surface, but I did not intend to use the adhesive alone and used mounting staples to keep them in place. If you are relying on the adhesive alone to hold these you may run into some frustration unless you have a smooth surface and install them on long straight runs. For my application this was not an issue, since I was using mechanical fasteners. Brightness running off a 9V battery was exactly what I was looking for - not bright enough to add accent in full sunlight or a brightly lit room, but for little to no ambient light (which is what my application is) they are perfect.

So I recently purchased a roll of these LEDs, as well as the Cool White 12V version. My project was to wire my new Matco Service Cart with blue LEDs underneath and white LEDs under the lid, wired to a magnetic switch on the N/O circuit. You open the lid, the magnets come apart, circuit closes, and the lights turn on. Close the lid, bye bye lights. Got all the wiring cut and crimped and tucked away nice and neat, and then attached the LEDs to their positions after wiping the surfaces down with mild soap, then water, then dry wipe. Whites have been up inside the lid since I put them there, not a single issue, but the blue... Well, they were all over the floor the morning after first install. I ran over half the strip with my cart's wheel before I noticed, destroying a large portion of them. Cut a new line from the remainder of the roll, and encountered the same thing later in the day... blue LEDs drooping and coming off the cart. I'll probably order another roll and just see if I got some poor glue in a batch, or what the case may be. Aside from that issue, the lights seem real sturdy, plenty flexible, certainly bright enough and they throw a nice indirect glow. Wiring them into their little connectors is troublesome, so I ended up soldering leads together when I had to, simpler that way for me. All in all, I'd recommend 'em if you're looking for some kind of lighty project.

I'll be using the strips for under workbench shelves light.Was originally sent yellow ones but was then sent the cool white I had ordered.

Simple to use

I've tried this strip in multiple places and it just sucks. Works ok for a little while, then the whole thing just dies. Also, it doesn't seem to matter what surface I stick it to, the sticky backing fails, I've tried painted and unpainted wood, glass, plastic and metal and it comes off pretty quickly. Avoid this product.

These are a very good deal, and I was able to connect them to 12V 1-amp converter (for 120V) that I had around the house. Unfortunately they are not the warm white 2700K advertised, and I would guess they are somewhere in the mid-3500K (cool white) range. They are quite bright for LEDs which will be useful for some applications, but in my case - for hidden cabinet lighting - they are a bit too bright given that they are cool white and not warm white. They installed easily, and it was simple to cut them to length. The adhesive backing works reasonably well, although it actually was peeling away from the light strip in some places even as I applied it.UPDATED: I figured out a quick-fix for overly bright cool-white light strips like these. Get some yellow-ochre oil paint. It takes about 5 minutes to dap a bit on each LED for the entire strip, and for under cabinet lighting (hidden) it works very well. I am attaching a "before and after" for just one bay of a cabinet where we wanted warm-white lighting, and the light from these cool-white LED strips was too harsh. In some cases we decided we needed a second coat, so don't worry about blocking the light - the paint can be wiped off or added to get the right tone.

I build custom led awards and use these in all my builds they have the silicone coating to make them "water proof and do everything I need the to do!

Pour avoir de la lumière sous le comptoir, mais ça ne colle pas du tout !!!!!

Nice bright LED lights but shouldn't be marketed as warm light. These are definitely more of a cool white light.

Very frustrating to fit this strip in my kitchen and find it looks like it's more suited to be for surgery with such cold lighting. Don't buy it.