🚐 Elevate Your RV Experience with the Vortex I Fan!
The HENG’S INDUSTRIES Vortex I 12V Single-Speed RV Vent Fan Replacement & Upgrade Kit is designed for RVs, campers, and motorhomes. This modern, bladeless exhaust fan features a 12V power source, a user-friendly push button switch, and a removable fine mesh screen. Weighing just 4 pounds and measuring 14 x 14 x 4 inches, it’s an efficient and stylish upgrade for your vehicle's ventilation needs.
Brand | HENG’S INDUSTRIES |
Color | White |
Electric fan design | Exhaust Fan |
Power Source | 12 Volt DC |
Style | Modern |
Special Feature | Bladeless |
Recommended Uses For Product | Replaces the screen of an RV roof vent |
Wattage | 21.6 watts |
Voltage | 12 Volts |
Collection Name | rv-fans |
Switch Type | Push Button |
Included Components | Cord |
Indoor/Outdoor Usage | Indoor |
Model Name | 90043-CR |
Control Method | Touch |
Blade Material | Plastic |
Manufacturer | HENGS |
Item Weight | 4 pounds |
Package Dimensions | 14 x 14 x 4 inches |
Item model number | 90043-CR |
Manufacturer Part Number | 8078545 |
Special Features | Bladeless |
N**2
Affordable upgrade
Install was quick and easy. It moves way more air than the factory fan however that comes at the cost of sound. The fan is definately louder, not necessarily a bad thing when used in a bathroom.
T**M
Love it!
Seemed like the cheapest way to go. I installed it completely from the inside. Took about an hour. Tapped in to a 12 volt light that's near by for power. I run it daily in the bathroom. Pulls plenty of air out. It's a little louder than I'd like, but with the bathroom door closed I can hardly hear it.
K**R
Good fan challenging install
The fan itself works well. It is far better than the oem fan that came with our Jayco rv. It’s a bit loud but we can live with that, since it pulls the air so much better. The only problem is that there were no installation instructions and it was a bit unwieldy to install. First, they do not tell you that you might have to move the hand crank gear assembly to fit the axle on the lid of your rv. There are 2 positions for this assembly. I had to move it for mine and I had to figure it out for myself. Second, it is very difficult to hold the unit in place while you try to put the screws in place. You will want a helper to do this.
J**A
Great Fan
This is a great fan to replace the cheap fan that comes on almost all camper.very easy and makes a lot of difference.I install 2 of them on My Cyclone and now bathroom can be use without a concern, also on that main area helps to remove food smell while cooking.
T**N
Easy addition
My new Jayco came WITHOUT a fan in the bathroom. Fortunately, there is a ceiling light near the fan-less vent.This fan couldn't have been any easier to install. I did have to lengthen the wires (cut them inside the fan and used wire nuts to add longer wires). However, they can't just include 10 feet on wire with every fan; each installation will be different.Took less than a half hour to install.I don't really care about the noise. It's a bathroom fan. What bathroom fan isn't loud. It's not crazy loud, but all of the noise is blade/air noise, there isn't any motor noise. If you want less noise, you need larger, slower blades that spin slower. You could always add some kind of a potentiometer to run the fan slower (which is going on my list of things to possibly do in the future).
B**A
Powerful vent fan
I bought this fan to upgrade the small vent fan my RV came with. I must say this is a powerful vent fan, and it performs extremely well. It must be noted however, it is somewhat loud, this might be expected due to its high speed. If you want to move air this is the fan for you ! !
N**D
Major alterations for Ventline install.
I wanted to give this a 5 star review because I think it's genius that you don't have to remove your entire vent assembly to install but...I like; that it moves more air than the one it replaces,It was affordable. Although only one speed and not reversible, I don't need to pull air in from outside via the fan since I have windows that when open will pull in air when the fan is on.I like that you don't have to totally disassemble your entire present fan assembly to install this on my brand new trailer.I don't like; the lack of any basic instructions.I hate that I had to drill/enlarge the holes that attach the ventlid to its lift knob splines. You have two choices, neither line up. I watched many videos on its installation and never came across any mention of this necessary modification. This claims to be a direct replacement for my Ventline but it's not. I used a step drill, carefully!Wires were extremely short requiring connection to be made and secured within the housing by the fan instead of outside the frame and in the ceiling.A neutral point is the noise level is acceptable. Not good but not bad either.I am more disappointed than dissatisfied I do wish there was a better quality version with clearer instructions available.
R**D
A nice addition to our RV
The van was install in a Coleman Lantern LT 17B camper. The lack of instructions is somewhat frustrating, but the van works great. My "other than 5 star" is due to this and the noise. It is somewhat noisy compared to some fans I have heard. Once installed, it is a great addition to our RV's bathroom, and it looks good.It does take an additional 1.5" of headspace from the already tight shower in this model for those who showered by "standing under the vent."
A**N
easy instulation
Fit perfectly. Moves air like a jet engine, but is fairly loud. Easily installed by myself but another set of hands wouldhave made it slightly better. Just ordered two more to replace the other two in my trailer. Overall a good productat a good price.
R**N
RV Bathroom Fan
First off no instructions included. YouTube has videos. Install was a little tricky because the vent opening gear did not line up easy and had to be forced into place. After that the rest is pretty straight forward positive to switch black wire. 2 screws to hold it in place. Cheaper than a fantastic vent fan. Single speed moves air better than OEM that was installed. I already had max air vents on all the openings so not having to take out the whole thing was a nice option. It does take more than a Phillips screwdriver but that is because removal of the OEM fan.
N**Y
A little noisy.
Fan was fairly easy to install. RECOMMEND having a second person. Fan moves alot of air but i find it very noisy and no quieter than the oem fan. Was hoping it would be much quieter.
Trustpilot
2 days ago
1 week ago