SEG Direct Genuine Leather Steering Wheel Cover, Stitch On Wrap, 15 Inch Steering Wheel Wrap for Car Truck SUV Pickup Boat, DIY Sewing with Needle Thread, Black

Fit great on my 2017 Prius Prime, after my steering wheel developed a small tear in the fake leather covering.I highly recommend it, though you do need to set aside a good amount of time before starting to install it. The shiny side doesn't smell much, but the suede side does. I didn't bother airing it out, and it doesn't smell bad after being installed (smelly suede side against wheel, sealed in basically) but there is a bit of that "new leather" smell if the car sits unused for a few days.Ignore the part of the instructions saying to push the needle through the leather for each stitch, just do it one time to tie the thread on through an existing stitch hole at an edge of the seam. I recommend that the seam be located by the edge of a spoke on your wheel, in my case near the 5 o'clock position, at the edge of spoke which goes from 5-7 o'clock. I proceeded counterclockwise to lace (sliding the needle under the prestitched threads, not punching holes or trying to use the pre-stitching holes) the first stretch of steering wheel to the next spoke. Then lace the thread behind the steering wheel across the back of the spoke until able to lace back and front together on the next stretch of steering wheel.I chose black thread for the black leather, which makes it harder to see how well you've done, but also hides any mistakes and makes them not matter. Because it can be hard to lace through hidden threads on the back, you can rotate it around to where you can see it, then rotate it back when you get near the next spoke. Plan on spending 90 minutes to 3 hours to do a great job, if you already know how to thread a needle and tie a knot.When almost completed, it may seem that you need to fold the leather to gather some up, but instead, just use the same rear lacing point with a couple of front ones, as many times as necessary on the last stretch to tug it to lay tight over that last spoke, without folding it.It looks and feels spectacular when done. If you don't want to see any of the stitching/bumpiness, when done rotate it slightly around to the back rather than being exactly on the inside of the wheel. I tucked the needle and remaining thread into the opening on the back of the last (very wide) spoke on my Prius Prime, so I can know where it is if I ever need to do a repair.

I had a similar wrap on another car and had a difficult time installing it. Maybe the second time around was easier but I didn’t have any issues. Hardest part is trying to get the wrap centered on the wheel. Put the seam at the bottom of the wheel and if it’s a little off you won’t see it. No need to pull super tight as you thread the cover, you might break the thread if you do but it will tighten up as you go. Just pull it snug as you go.Very professional look if you just take your time. Took me about 45 minutes taking my time to make sure it’s done right. On a D shaped wheel.

Replaced an old one that was 16 years old and on the second truck steering wheel.

This really wasn’t hard to do. Getting the cover on was a bear. The stitching is easy. Watch the video and get it done. Takes some time but turns out very well, especially for the price!!

Perfect on 2010 Honda Accord!!!

This product looks great when done. The install was not hard but it did take some time. You have to be patient and leave enough time. It took me close to 2 hours. Be sure to watch the video first. You get 2 needles and 2 threads. The video was not clear on whether you need to double the thread or not. I thought it looked that way so I doubled it but then ran out and had to tie it off and finish with the second string. The material feels really nice in your hands. Definitely pleased with it!

Seems to be a brand new steering wheel. Easy to install.

I love the feel of it. It does take some time to lace it up and it turned out great. Great product.

Me ha gustado la rapidez del envío, lo bien presentada que viene y con todos sus accesorios para instalarla además de la calidad muy alta de la funda que es de piel original y lo bien que se h adaptado al volante de 39cm sin problemas. No deja arrugas, buenos acabados y excelente tacto natural. Uno de los productos que cumple con creces lo que promete no os compre sus una barata para que en un año la tengáis que tirar porque no es piel👍

Piel de muy buena calidad. Tengo un polo de gama baja sin volante de piel, y ahora he conseguido que sea como los coches que vienen con volante de piel. Muy contento. Es laborioso y cuesta un poco (tienes qeu apretar bastante el hilo y poco a poco). Pero me ha quedado genial. Llevo ya varios meses y perfecto. Muy contento y aconsejable el producto. Y el hilo de muy buena calidad (estiro mucho y no se rompio). Ademas venía con dos hilos y agujas por si acaso.

Utilizzato su una Ford Fiesta MK5 del 2004 con il volante che si era completamente sbrindellato.Non è stato per niente difficile cucire questo coprivolante in pelle. Il tempo impiegato è di circa un'ora abbondante se si vuole fare un lavoro preciso.La pelle è di buona fattura e molto resistente, nei dettagli delle foto si può vedere come in alcuni punti il filo è molto teso per consentire una perfetta aderenza nelle parti più scomode del volante, e anche in quei casi, la cucitura ha retto benissimo il tiraggio che esercitavo per tendere la pelle.Istruzioni semplici ed intuitive, il filo si passa nelle cuciture esistenti e non nei fori della pelle, questo semplifica di molto la fase di rivestimento del volante.L'unico punto difficoltoso è quando si finisce il giro e bisogna nascondere il filo dopo l'ultimo nodo, all'interno della pelle.Ho utilizzato il filo doppio per mia sicurezza, ma poi ho visto che anche singolo è più che sufficiente per tenere la pelle al proprio posto.Consigliatissimo, visto anche il prezzo dei coprivolante universali in materiale sintetico e che non si adattano perfettamente ai volanti.

The media could not be loaded.  Escéptico al principio y encantado de que logré montar la funda del volante, siguiendo las instrucciones del video en youtube, que explica paso a paso qué hacer. El producto recibido contiene todo lo necesario para instalar la cubierta del volante, lo cual fue genial.Quizás menos tijeras con las que cortar el hilo al final.Lo recomiendo con confianza. no olvide revisar el video con instrucciones antes y durante la instalación.

Tot i ser una mica entretingut el posar bé aquesta funda, el resultat es molt bo , amb un tacte agradable, que dona una millor sensació d’adherencia.Cal hidratar periòdicament amb algun producte específic per pell