ExedyNSK1000 OEM Replacement Clutch Kit

Install was straight forward and works great! My 06 350z is sliding easy again haha

Pretty much oem and easy to install

good clutch kit, this is to the best of my research a direct OE fit and is compatible with the dual mass flywheel. problem is, you cant really tell the condition of your flywheel until you get the clutch off... if you get it off and find the flywheel cant be resurfaced (which is common on DM flywheels to my knowledge) you're stuck until you can get the matching flyhweel.for those who need a quick job i recommend getting the version of the kit that comes with the flywheel.i had a shop install this, and i dont know if i should blame the shop or the part, but i get a lot of chatter in idle with the clutch out. otherwise, its pretty much exactly the same as the original flywheel.docking one star for the chatter in idle. otherwise, excellent part.

I used this clutch along with the LuK DMF067 Flywheel. I replaced my previous clutch at ~30k in because my throwout (release) bearing seized up and since I had everything apart I figured I might as well replace everything. My previous clutch was the cheapest one I could find on eBay at the time and this EXEDY clutch feels a million times better. I think the biggest thing will be that I trust that this throwout bearing will last longer than the one from the cheap brand.Clutch pedal is extremely soft now to the point that I barely have to press with my foot.This kit comes with the clutch disk, pressure plate, throwout bearing, brass pilot bearing, alignment tool, and a small packet of grease.

I just finished a clutch/flywheel job on my 04 350z. My last clutch was some crappy XTD stage-1 from ebay. It gripped way to hard from the get go and had severe chatter issues as well as a bum throwout bearing. I believe the place that did the clutch job botched it anyway so I do not think I can blame the clutch. There was still plenty of friction material left. I have only driven about 100 miles on this new Exedy clutch, but I have to say it is smooth as butter. My clutch feels even better than a new car. I still have a little bit of chatter but that is mostly due to lightweight flywheel and differential bushings are soft. You can't beat the OEM feel of this clutch for the money. Will buy again.