Q: Will it beep for lab grown diamond?

it should but if it doesn't beep then take it to a jeweler to have them check it out. plus you can go online and see

Question 1

What is the small black thing inside the package that is shaped like the capital letter E

Accepted Answer

Mine came with a thing to hold loose diamonds...is this what you’re talking about?

Question 2

Does this unit test uncut stones?

Accepted Answer

How To Test Diamond
Turn on the switch.
Make sure only 1 light is lighting up on the scale.
Wait few seconds for the probe to heat up until Lamp on ready OK.
Turn on the lights numbers corresponding to the indoor temperature and diamond weight.
If don't know. Set 4 lights is lighting up on the scale.
Start test diamond, no need to adjust the switch switch.
Use the diamond discriminator probe to make 90-degree contact with the measured object, and observe the indicator light change.
It needs a little bit of force to stop it on the diamond surface and make full contact.
If unsuccessful, please repeat the second step.

Hqdz Diamond Tester Pen
Test result analysis
If lights >= 9 and have sounds, it is true diamond.
If lights < 9 and no sounds, it is not diamond.
If lights is 7 or 8, it is true crystal.
If lights is 6 or 7, it is true jade.
If lights is 4 or 5, it is glass.
Don't test metal，Don't wear gloves.
In a low temperature environment, the battery discharge is weakened. Please raise the battery temperature to above 10 degrees Celsius.
The test takes a few minutes, please turn off the power after the test is complete.

Question 3

Why does it go to red and beep on a chain  I believe it’s gold . It’s the same beep noise as it sounds with a diamond. Not the weird sound on metal

Accepted Answer

How To Test Diamond
Turn on the switch.
Make sure only 1 light is lighting up on the scale.
Wait few seconds for the probe to heat up until Lamp on ready OK.
Turn on the lights numbers corresponding to the indoor temperature and diamond weight.
If don't know. Set 4 lights is lighting up on the scale.
Start test diamond, no need to adjust the switch switch.
Use the diamond discriminator probe to make 90-degree contact with the measured object, and observe the indicator light change.
It needs a little bit of force to stop it on the diamond surface and make full contact.
If unsuccessful, please repeat the second step.

Hqdz Diamond Tester Pen
Test result analysis
If lights >= 9 and have sounds, it is true diamond.
If lights < 9 and no sounds, it is not diamond.
If lights is 7 or 8, it is true crystal.
If lights is 6 or 7, it is true jade.
If lights is 4 or 5, it is glass.
Don't test metal，Don't wear gloves.
In a low temperature environment, the battery discharge is weakened. Please raise the battery temperature to above 10 degrees Celsius.
The test takes a few minutes, please turn off the power after the test is complete.

Question 4

Will it beep for lab grown diamond?

Accepted Answer

it should but if it doesn't beep then take it to a jeweler to have them check it out. plus you can go online and see

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App

Professional Jeweller High Accuracy Diamond Tester For Novice and Expert - Diamond Selector II 9V Battery Included

Details

Description

Have a Question? See What Others Asked

Common Questions