Noulei Shiny PLA 3D Printing Filament Silk Copper 1.75mm for 3D Printer 0.5kg/1.1lbs Spool

very good quality for 3d printing

over all the product was okay, had a few problems printing with it at first, the prints came out vey brittle and broke off easily, at lower temp (around 198c) would reccomend slower printing speeds and higher tempratures (207c) to get a better finish.

تم الاستلام في أسرع وقت جيد اللون مطابق للصوره تم الطباعة

So far this is my favorite PLA filament and I have tried from other companies. prints perfectly on my ender 3 v2

Stringing way too much..I've tried all kind of tests from retraction and temprature.. it's stringing tooooo much

Really good 👍🏻

Its stringing a lot

I got this as the first PLA roll after the sample one that came with the 3D printer. It was impossible to complete a print with it. The problem was that:1- It strings too much when you print (vs the sample that I used before)2- It is too fragile. It breaks very easily.3- It stops going through half way through a print. I tried to redo multiple times and change settings (temperature, speed) and it didn't help. I have replaced it now with a different color PLA) and am still getting strings coming through prints.Very frustrating. I learned to spend a bit more for a good quality filament instead of wasting the money and time I spent on this one.

光沢フィラメントは色味が微妙に想定と違っていたりして難しいのですが、実物を見るとこのフィラメントは写真より少しオレンジぽく見えます。JAXAのはやぶさ２を作るために購入したので、丁度良い感じですが金印を作るつもりであれば少し濃いと思います。購入した時よりも値段が上がってしまっていたので、星を一つ減らしました。500ｇのスプールも安定して供給してもらいたいですね。

Ok

First silk pla I've used on my anycubic chiron and as it's my first i have nothing to compare with to be honest, But what's there to compare to the quality of the print was second to none with very little stringing and a few marks on the print but that is purely down to the settings which need a slight tweek as the parts wear over time, As for breaks and snapping mid print absolutely a big fat zero on that one not had any of that stress and as some of my prints have been over 40 hours there is nothing more disheartening than when the filament snaps after the bloody break sensor and you check the printer the next morning and it's printing nothing above the print ad it hasn't registered the breakThe filament was as dry as you'll ever get it out the box with it vac sealed tightly and not leaking when sealed like some have that I've recieved and also came with the obligatory silica gel bag to keep the filament as dry as you'll ever get it from the factoryAs for other brands of silk pla I've had such good success with this one there is no need to find another brand, Don't fix it if it ain't broke as the saying goes, As long as they supply the filament at this quality and can consistently supply it at this quality, I'll be more than happy to stick with theseAnd that shine off the print in different light angles!!!! 👌👍

Bronze colour looks nice, but it is impossible to print without warping and coming off the build plate. It doesn't happen immediately, but 4 - 5 hours into the print. Very frustrating and a waste of plastic. I'll stick with my usual brand.Edit. Had to use blue painters tape to get it to stick. Also upped the nozzle temp to 210C and plate temp to 65C. Fan to 85%

I received this item today and fed it directly into the extruder, 20 mins into print it was tangled, so I started again 45 mins later it was tangled on the spool yet again this happened a third time, at which point I was extremely frustrated, I would rather spend a few extra quid for a neat spool with no overlapping pla material, than one that is extremely poorly wound, first impressions (not a happy customer)I hope overs do not have the same experience I had!