Harmony AudioHA-701721 Compatible with Honda Civic Si 2002-2005 Stereo Radio to Aftermarket Radio Harness Adapter and Metra 99-7860 Single/Double DIN Installation Kit

Came super fast, snapped right in and the connector was the right one, the only problem was the plastic bezel for the radio was kinda warped and doesn’t sit in properly but other than that turned out great. To install pull off the shift knob, pop out the bottom piece of trip with shift boot. Disconnect hazard button. There are 2 8mm bolts (5/16) on either side of the bracket (they are annoying to get to, just use a socket not a wrench because they aren’t tight). Loosen the two bolts a few turns and take out the two screws towards the front (they are on a metal bracket, just pull them out and drop them in your cup holder. Pull up from the bottom and the whole console will pull out. Disconnect the three HVAC plugs and the radio plug and antenna, pull the four screws out of the radio and the four from the pocket, slide them from the front and snap in the trim piece, install the radio bracket and radio. Make the connector by attaching color to color from radio harness to harness adapter. Re install everything and tighten the bolts back

Excellent fit in my 2005 Civic Si EP3 with a single din Kenwood Excelon DDX-700. Good buy!

Worked great

Did not include wiring harness. Just get the bracket for less elsewhere. Item description clearly states it comes with this harness.

This filled the gap in my 02 Civic Si and gave it a professional look. Just had to carefully cut the thin plastic in the middle to fit the double din stereo.