5 Pin Male Din Plug to 4 x RCA Phono Male Plugs Audio Cable 1m (~3 feet)

I didn't have an old CRT I could hook it up to, so I got this cord and it worked great, gives a great picture and no interference, it's a decent cable.

Bought a old Atari computer and this cable works perfectly and provides a nice clear display.

This cable has both composite and separate chroma-luma output. It will work with either composite monitors or monitors like the Commodore 1702 that have separate chroma-luma inputs. It also has mono audio. It provided a great picture from my 80s-vintage Atari 800 to a Commodore 1702 monitor in both Chroma-Luma (rear input) and Composite Video (front input) modes. I tested it only on the Atari + 1702, but it should work with any 5-pin Atari, Commodore or TI computer with the 5-pin DIN video connector.On the Atari 800, the cables are:BLACK -- Mono AudioYELLOW-- Composite VideoWHITE -- ChromaRED -- Luma

The kenable 5 Pin to RCA cable allowed me too connect an old Atari 800 to a modern monitor. I was a bit puzzled by the four (rather than three) RCA plugs. When I connected the red, yellow and white plugs, I got only a loud hiss. Removing the red and white plugs and connecting the black plug to the sound input, the problem went away. So it does what I needed.

This DIN to RCA cable works perfectly with my audio equipment. I have 4 RCA jacks on my stereo receiver to connect to my cassette deck - Left/Right for Play and Left/Right for Recording. My cassette deck has a single DIN jack for both Play and Recording. Based on the correspondence between pin numbering and colors, here is how I connected the 4 RCA male plugs into my receiver, by the color of the plugs:Black: Left Rec (Out)Red: Right Rec (Out)White: Left Play (In)Yellow: Right Play (In)I highly recommend this cable if you need that RCA to DIN conversion.

Great construction quality and promptly shipped.

I recently purchased this for my Commodore VIC 20, but unfortunately, it didn't work as expected. The cable wasn't able to establish a proper connection, and I had to return it.The cable's build quality appeared average, and it seemed like it should have done the job, but for some reason, it didn't work well with my setup.It was a bit disappointing that it didn't meet my needs, but sometimes, these things happen when dealing with vintage hardware.

The 800 came with a built-in connector that attached to an ordinary TV using a TV switch box. But, they also included a monitor port on the side that takes a 5 pin Din connector for a monitor. Pulled out the 800 to see if it still worked. I read that you could use this port to connect to a modern TV. Ordered this plug and was able to hook it up to a 22 inch flat screen and it looks and sounds amazing.The thing that was nice about this company is that they included a small instruction sheet on which RCA connectors to use for picture and audio for your particular computer. Kudos

With this cable I've connected a TI-99/4a computer to a modern display. This is exactly what I've needed.

... was RX und TX für einen Diodenanschluss ohne Kopplung realisiert und auch von der regulären Belegung gebrauch macht.

Funktioniert einwandfrei

Simple and good quality.

Good