HM&FC 2" x 50' Titanium Fiber Exhaust Wrap Roll for Motorcycle with 10 Stainless Zip Ties

This exhaust wrap is close to the original type. The original has its weave pattern diagonally across the wrap, while this one is at 90 degrees to the edge. That being said, it worked quite well for what I used it for. Here in southern New Mexico it is very dry and hot. Keeping underhood temperatures down goes a long way to keeping the plastic clips and plugs in our motors viable for a longer period of time. I used this to wrap the stock exhaust of an 04 Camry LE 2.4L. from the beginning of the primaries, wrapping the converter, flange, flexible coupling and stopping to just past the O2 sensor (sensor 2) around the back side of the parking brake handle. After polishing the SS shielding that came stock, I put that on over the whole thing again to protect it from damage mostly. Underhood temps are lower, radiant heat is lower on the oil pan for both the engine and auto-trans, it seems to have given it a bit more power near top end and WOW did it ever make the exhaust quiet from inside the car. I feel like Matthew Mcconaughey in his latest advertisements. I totally suggest this part for anyone in the arid southwest of the United States where we don't have to worry about premature exhaust failure from these types of wraps.

I purchased this stuff to wrap my 1950 Chevy exhaust. With dual exhaust I ended up wrapping both pipes from the exhaust down past my engine bay and it was more than plenty. I ended up saving so much leftover that I was able to redo it once more at a different time because I accidentally ruin both sides while removing my engine. The golden brown color I choose matched my paint perfectly which made it stand out nicely. Then the chrome zip ties added the final touch. Quality is great and durable. Make sure you use eye protection and gloves. This stuff is very itchy.

The reason for the four stars is the SS Tiewraps!Skip those flimsy SS tie wraps and go to hardware store and buy some SS hose clamps!Much safer and looks fine! Just imagine those flimsy SS ties they give you coming lose while doing 50/80/90/100 MPH getting stuck in your chain, wheel… OMG!

I highly recommend this I use it on all headers that I install. Not to mention it's a third the price you'll find at AutoZone or O'Reilly's. I feel like it's actually a better quality. At O'Reilly's this stuff is upwards of $60 per roll. It is a fiberglass wrap would be surprised if it actually has titanium in the material itself, I think that represents the color is all that is. None-the-less the stuff works great. keeps the engine bay cooler than without and therefore making a better intake temperature and of course means a better running engine. Be prepared to get itchy because it does have fiberglass in it. I wear gloves, and it's up to you if you want to dip it in water but you really don't have to. Also, be careful if you do dip in water that you don't snag it because if it starts to unravel it's like a bad sweater it'll continue to unravel.

I had old exhaust pipes....painted black by the previous owner, and rusted. With this wrap (and a pair of used mufflers) nobody needs to know the disaster that lurks underneath. Solved a big issue, saved me hundreds of dollars...and I think it looks pretty cool also. One roll covered both pipes, as shown in the pic...

Used nearly 75 feet to wrap a 4 cylinder motorcycle exhaust from the primaries back to the muffler.This stuff works surprisingly well!After an agressive 20minute session the wrap was cool enough to touch! 1"away from the wrap was so hot it burned me a little.Wear the gloves when installing, very irritating to the skin.If you don't have a special tool for the clamps you can use a pair of needle nose pliers and pry the clamp tight. Cut the excess in a safe manner and bend the leftover piece back over the clamp. Steel clamps are annoying without the tool but once cut will look better.My personal favorite part and most surprising is that the exhaust is actually a little quieter and deeper sounding.

Great product, I love the way they look. The ties worked well for me, but I've seen that other people have had issues with them so maybe have some spare ties or hose clamps if you want to make sure they are tight. I took my pipes of and then wrapped them, so when I put them back on my bike, I sprayed them down and let it run for a while to dry them off and they smoked and stank quite a bit, but that's to be expected.Make sure to wear gloves, this stuff is pretty nasty to get on/in your skin and it definitely will if you aren't careful.

The media could not be loaded.  2 complaints that aren't 2 big of a deal breakerMaybe it was me using a box cutter as I didn't have sharp enough scissors, but the wrap frayed like crazy and not just on the cuts like everywhere. Required extra time to cut them all offSteel zip ties are strong but to fully tighten them u need a special tool, or just pull tight with pliers and jam a pick or something into the bearing to force it from loosening that 1 mm when it rolls back into the lock position.Be aware the wraps will steam/smoke a lot on startup if you used the recommended wet install, it's normal.Product works great, I got a cooler bike and a cooler ride. Thanks!

Watched several you tube video on how to install. READ THE INSTRUCTIONS, applied wet. Applied hight temp clear paint on top. Used to wrap custom exhaust piping on my motorcycle. Looks awsome 👌. Pipes still get hot, but not like bare metal. Very happy. Time will tell about durability.

Good buy, works %80 as advertised, make sure to wear the gloves even double them up or you'll be itching for weeks, it heats with the heat from the exhaust on my atv but don't block as much as I'd like it too

There were a lot of imperfections in the weave, very low quality. Looked at it again this morning, and it is already falling apart; because of the quality of the weave it has started splitting right down the middle of the length...

Great product for the price, exactly what I was looking for. I didn't use the clamps that were provided instead I got some Stainless pipe clamps.

If you're looking for a heat shield don't waste your money it doesn't protect nothing at all!!! I did a heat reading before installing it and I got same reading after installation now I have to take it out and hopefully buy a proper one.