NOVA3D Water Washable Resin 3D Printer Rapid Photocuring UV 405nm Resin Standard Photopolymer Resin for LCD/SLA/DLP, 1000g/White

It's hard to show off such minute detail in images from a phone, but what I hope it does convey is how good they look!I've bought the 1L quantity of the grey resin twice now, having used up the first bottle before I'd known it, and am really loving the hassle-free nature of using it. I haven't had to worry about IPA and washing the models is so quick that I haven't found any need for any expensive cleaning tools - literally just an ice-cream tub filled with water.Although I'd definitely recommend still using gloves, goggles and a face mask, the smell isn't particularly potent (such an underrated benefit) and have printed in a well ventilated room next to the sitting room without any sort of problem. The slightly higher price might put people off, but I've definitely found it to be worth the money. The time and hassle saved alone from not having to stock up with IPA - and the ease of cleaning any spillages - has made using this resin an absolute dream. I've had hardly any failures and would definitely recommend it to beginners or experts alike.For anyone interested, I'm using an Elegoo Mars 2 with these settings in Chitubox:Layer Height: 0.05mmBottom Layer Count: 5Exposure Time: 3s (Can be slightly lower or higher - very dependent on how risk averse you are - I'm not particularly and want models to never fail!)Bottom Exposure Time: 35sand the rest at default. Works a charm.

I have been resin printing for nearly 18 months now and have tried most of the resins available. I prefer the water washable resins as the clean up is so much easier and obviously nicer for the environment!The only drawback with water washable is usually the cost, as it rises as soon as you choose this type!However, not so with the Nova3d which was on par cost wise with a lot of branded standard resin. I hadn’t tried this make before and I have been pleasantly surprised!I used alongside a Photon Mono X and have been delighted by the quality. Details are good and clean up was easy. I’ve tried some white resins and as soon as you cure they are distinctly yellow, but this one has proved to retain a good shade.I use 40 secs base, 2 seconds later on my mono x and so far so good , and will continue to use Nova3d resin.

I mainly bought this as it popped into my Amazon list on promotion. I am very happy that I did as it gives excellent prints. I mainly print greeblies for the building I make with the odd figure. As you can see by picture one you get very high detail with your prints. Fido will be tagging along with my Kill Team squad. In the second pic is some of the greeblies I printed using this resin. Most of them have very small detail which prints very well. I use the Elegoo Mars Pro, please see my settings below,Exposure time: 7Lift Distance(mm): 5Lift Speed (mm/min): 100Bottom Exposure Time : 60Retract Speed : 150

new to 3d printing, have an elagoo mars, after reading reviews on here thought id give this resin type a go, have to say was very impressed when the print finished, great detail, printed one half of a ghost shell from destiny at 1:1 scale, clean up afterwards was way quicker than with normal resin, less mess, deserves five stars for that.however, i printed off the other half of my model, again all was well, but a day later both models began to split along seams, so not sure if this is down to me being a newbie, perhaps not curing long enough (10mins), wall thickness of the model being too thin (2mm) etc. so if anyone reads this and can offer any thoughts regarding the failure of the prints that would be great.other thoughts, love the low odour, clean up is very easy.

I've used this Resin a number of times and if i'm honest it's so easy to use and clean. There's a minimum smell, no need of alcohol, all you need is a sink!!. I’ve been printing 38mm tabletop figures and getting around 80-120 models per 500ml bottle. I've added a few pictures that are straight from print with just the supports removed, you ‘ll be able to see there's hardly any clean up work to do.I've been using this Resin with Elegoo Mars after playing around with settings. I've found these settings are perfect for what I need it for.Layer: 0.05Exposure time: 6 SecondsBottom layer: 0.05Bottom exposure time: 30 seconds

I bought this resin after struggling with failed prints using white water washable from another company. I’ve found now that I have a lot fewer print issues, and there’s very little odour during printing.The resin is easily cleaned off the prints with a little soapy water and a soft brush, and there’s no tackiness after they have dried and cured. I’ve even found it works well at lower room temperatures (previous resin recommended a room temperature of 22-25C) but I’ve achieved successful prints at 15C with this

Have used the Nova3D grey waterwashable with good results, but grabbed a bottle of white as a change and experiment.I think it smells slightly of mint, my wife disagrees, but we both think it's much more easy on the nose than the grey.We use a Anycubic Photon Zero for mostly hobby prints for tabletop roleplay games (mostly at 0.05mm layer) but printed a couple of large figures at finer layers (0.02mm) for gifts at Christmas and they were superb!Layer: 0.05mm (sometimes 0.02mm)Exposure time: 8 secondsBottom layer: 5 layersBottom exposure time: 55 secondsIt's now the 'go to' resin for us.

Super résine tous mes paramètres sont ceux par défaut sur les logiciels tel que Chitubox ou LycheeSlicer.Je pense que beaucoup de gens qui reproche quelque chose à cette résine ont un problème avec le nettoyage. En effet la résine ramolie vraiment beaucoup si on la laisse en trempage plus d'une minute. Donc ceux qui sont habitué au lavage ultrason de 5 minutes avec l'alcool isopropyle se retrouve avec des détails lavés.Mais comme d'habitude. Chacun se fera son avis dans la jungle des commentaires Amazon.

You brought a resin printer. Sounded great right? Then the reality of resin kicked in. The stuff touches everything and is difficult to clean and uses expensive alcohol to wash clean.Well I can tell you this is different. So much different.Yes the upfront cost is higher, but the offset of not requiring alcohol to clean means that per litre this works out about same with those costs. Gloves? Tired of chucking away heaps and heaps of gloves? Now a dedicated pair of washing gloves is all you need (the reusable type people) a bucket of h2o is all you need and I do prefer a toothbrush to clean up also. To remove any non cured resin. These will wash off the resin in water quickly and easily. And the next bit of news will win you over everything is able to be washed in water!After calibration of the machine to the resin I am using my machine at a lower UV (50%) and slightly longer exposure (1.8s) I have been getting flawless results.How I setup.A metal tray (that will only be used for resin) a baking tray is suitable this I use to put my prints on straight from the machine after I have held at an angle over the Vat to drain any more resin.From there to the laundry tub which I have my wash head ( one you could wash your hair with) ready and a bucket to wash the parts off into. DO NOT DO THIS INTO THE KITCHEN SINK! Don’t mix resin and food preparation areas. Wash resin off into bucket and then scrub parts down clean (I release the print fro the build plate at this point.)Then take the prints out and onto the now clean tray (which you cleaned along with the parts) and transport to your curing location.Then take said water outside and expose it to sunlight for a day if possible before pouring clean water into a large tray to evaporate it if possible and any sludge into an old bottle and take to a chemical disposal site for proper disposal.

Vaya malgasto de dinero.Cuando pides precisión, se rompe, incluso en un piano de cola, el final salió a tres capas porque no se fundieron.Sólo apta para modelos macizos, ahí si funciona bien, pero para eso, imprimo en FDM y no las500ml para un coliseo. El resto a la basura.Nunca más.

Printed with Elegoo Mars2proVery happy with the print quality of the resin. I tested at 0.5 and 0.2 layers, both showed nice details.Had no print failures or issues with it so I can recommend it.Did not change print settings far from default, though I made the cure time for the first layers around 50 seconds to ensure a good bond to the build plate. may be more than necessary but I'm so far happy with how that's worked for me.

Fatto diverse stampe e tutte sono di ottima risoluzione e oltre hanno aderito perfettamente al piano di stampa.