Aluminum Strips Anti-Fog Nose Wire Nose Bridge for Mask 90MM Metal Flat Nose Clips Nose Bridge Bracket DIY Wire for Sewing Crafts (100PCS)

Perfect. I use these on masks that don't already have a nose piece and also on masks that have flimsy ones that don't conform well. This has turned masks that I would otherwise be unable to wear into my favorite ones.They stick very well to every fabric I have tried. They will often make it through the washing machine a time or two or three. Not always, but often. Especially if I hang the mask up to dry. Even if they look like they are only partially attached, once it dries, they stick back on. They don't do as well through the dryer, but sometimes they survive that as well. I have never had a problem with them affecting my machines, so I just leave them on the mask until they fall off and then replace them.They work fine on either the inside or the outside of the mask. When I use it on the inside, I like to also use adhesive foam strips meant for masks over the metal, both because I don't love the feel of the metal on my skin, and also because they create an even better fit. Add in some cord locks for adjusting the elastic ear straps, and you can really customize the fit of any mask.

It took a while to get to this review, as making masks took priority. Everyone in my family wears glasses and three of us sew masks. These work great as an addition to a mask with out an adjustable nose bridge, as well as for sewing into a pocket on new masks.I haven’t had one that is sewn in have a problem, yet. They maintain their thickness and flexibility without breaking from metal fatigue over the months since I purchased these. While the ones stuck on the outside of masks eventually lose their adhesion to things after many uses, those can be placed in a pocket on masks made for replacement nose strips.Overall, great purchase, easy to use, 2 day shipping despite ordered at the height of the first wave. My sister followed with an order for her own mask making production.

These are much easier than trying to use floral wire, though they are a bit flimsier because they are so thin and lightweight. As one person mentioned, your sewing needle on your machine will probably go right through them if you want to add them that way (mine did).I doubled them so they would be a little thicker.I loved the adhesive on the back - nice and strong and held the piece in place while I sewed around it. If you aren't planning on washing or sweating a lot, you probably don't even need to sew them.Because I felt that I had to double them up on the family ones, they lost a star. They function fine as a single, I just wanted a bit sturdier. Can't beat them for the price!

This product works great for the intended use. Which is a nose pinch for the fabric masks. The adhesion isn't the best but since I have a heat press I have found if I use my heat press to attach to mask it adheres beautifully without ever lifting. I'm sure you could do the same with an everyday iron. These are good value. I sell custom masks for my small business and I bought these to include with masks. I have already bought these twice and will continue to buy. I recommend these

The vendor may have changed the description after I purchased this product. I can't prove it. Maybe it once said 50 for $9.99, though I Doubt it. The product is good! By the time I use all fifty-one of these "Aluminum Strips Adhesive Back Nose Wire Nose Bridge for 90MM Metal Flat Nose Clips Nose Bridge Bracket DIY Wire for Sewing Crafts (100PCS-NEW)", I will have forgotten that there were only 51 in the package, not 100 of them. Then again, I doubt it! I wish Amazon was better at managing their vendors and reading these comments.These are well made and very useful. I would buy them again! However, I think someone miscounted when packaging them. Then again, I may be buying them sooner than I had anticipated. I will most likely choose a different vendor, next time.THANKS?

A flexible metal nose bridge is a good way to improve the effectiveness of a cloth face mask. These strips are a good way to upgrade existing masks.I have a number of masks with a stitched pocket for a nose bridge, but no included metal strips. I bought these to upgrade the masks. Turning the mask inside-out (as much as possible) makes the pocket accessible. The adhesive on the strips can make threading the strip a little awkward, but not impossible.In practice, the strips are stiff enough to be effective. I noticed a significant reduction in glasses fogging with the strips in place. The adhesive is good for keeping them in place. The adhesive can withstand at least a couple of washes.One of the strips (on a child's mask) broke after too much flexing. However, the package contains a huge number of strips, and fitting them is easy, so it is straightforward to replace any that break or where the adhesive becomes weaker.

I ordered these because some of my masks didn't have a nose wire even though they fit perfectly in all the other ways I needed them to. I figured this might be the fix, as I wear glasses and need a snug fit across the nose bridge. These arrived quickly. They stick and bend nicely. Easy to form to my face. I only wish they had a little hole on each end so I might sew them into place for good.

I ordered these for my mask making as I’ve been using floral wire sewn in. These were great to use and will be more comfortable. I put it inside the mask so I found it worked best for me to stick 2 of them together then sew them in place inside the mask. These are like very thin aluminum and a little too thin so putting 2 together solves that for me. Do not expect these to be metal like what you find on commercial made mask. My son liked them as they are more comfortable but I like a harder pinch at the nose on my mask.