Our Bimini Boat Tops provide lots of refreshing shade while affording you visibility over your windshield instead of just through it. 7 OZ SOLUTION DYED POLYESTER Fabric. THIS SET INCLUDES: A) 2 Brand New, SQUARE TUBE, FREE STANDING PONTOON BOAT Bimini Top Frame.(Consists of 2 frames. Rear bimini is a 4 bow top with running light cutout, zippered sleeves, rear brace kit and front hold down straps. The forward bimini is a 2 bow top with zippered sleeves and forward brace kit. The front top zips to the rear top providing full 16' of coverage) B) All necessary Installation Hardware. C) Bimini Top Fabric.. Consists of 2 frames. Rear bimini is a 4 bow top with running light cutout, zippered sleeves, rear brace kit and front hold down straps. The forward bimini is a 2 bow top with zippered sleeves and forward brace kit. The front top zips to the rear top providing full 16' of coverage. NOTE: The variation in rail height must be less than 6" for forward and rear tops to connect properly. Not recommended for fishing series. HOW TO MEASURE: Step 1: Determine the length of bimini top needed. Step 2: Determine the width of the bimini top: Measure from mounting point (where top attaches) on one side of boat to same location on opposite side of boat (not the same as beam width) Widths of the Bimini BoaTops are specified in increments of approximately 6"; since the aluminum frame has a degree of flexibility, it can be mounted over widths that vary slightly. Step 3: Determine height: From mounting location, measure straight up with a tape measure for the correct top height. Our Tops come to you partially assembled to greatly simplify the complexity of setup and reduce the time required to erect on your boat. NOTE: Please make sure you select the correct size of bimini before ordering. As 20% restocking fee will be applied for all returns or exchanges. This is not an OEM FRAME, it is aftermarket. It might look and fit differently compared to OEM frame.
Trustpilot
1 month ago
2 weeks ago
