✨ Elevate Your Sink Game with Zalava! ✨
The Zalava Soap Dispenser is a sleek, stainless steel solution designed for modern kitchens. Featuring a 47" extension tube for easy refills, a check valve for mess-free operation, and a user-friendly installation process, this dispenser combines style and functionality. Perfect for those who value convenience and aesthetics in their home.
Brand | Zalava |
Model Number | ZA-ZYQ-LS01 |
Package Dimensions | 15.24 x 12.7 x 7.62 cm; 380 g |
Material | Stainless Steel |
Item Weight | 380 g |
S**V
The Perfect Soap Dispenser
This is probably the best soap dispenser on the market. The whole unit is made of stainless steel which simply oozes quality and should last for years to come. Even the pump is stainless steel unlike the plastic ones of other inferior products on the market. Very easy to install - took me about 20 minutes. Just screw the main body into the hole of the sink, connect the tube to the pump and slide the pump in. There is even a valve at the end of the tube to maintain the vacuum so the soap does not drain back into the bottle. The supplied rubber washers guarantee a perfect seal top and bottom. I primed the pump by sucking up some water from a glass and used a syringe to suck up the soap to the top of the tube. Once connected the unit worked perfectly. Very smooth action. Cannot recommend enough!!
�**�
GREAT ONCE YOU GET IT GOING 👏 👌
I wasn't expecting it to se so heavy it really is well made. Very easy to install fits perfectly in standard holes on new sinks. Firstly I couldn't get it to work it just wasn't pumping the liquid up. But asked my husband to help me out with it and he took it apart and put everything back together just a bit more tight. It took some time to get the liquid all the way up as the tube is a bit on softer side . Once we got it going there was no problems since. NO MORE MESSY BOTTLES! I'm thinking about getting another one and use it for hand soap 🧼 🤩
A**R
Disappointing
I was hoping that an all metal design would last longer. Only lasted a year, then completely failed. Tried replacing o-rings, but essentially a poor design
M**N
Zalava Soap Dispenser, Quality Product
I purchased a cheaper soap dispenser some months ago which leaked from the top of the pump cylinder which would then leak down into the cupboard underneath. .A first I thought it was down to the viscosity of the soap but after trying various soaps the pump still kept on leaking. The Zalava Soap Dispenser is of better quality (engineered) was easy to fit and after a number of weeks does not leak happy user.
L**N
Great product
Easy to install but fiddilly to get working as sometimes the tube in the big bottle gets lifted out so sometimes when pumping a lot of air comes out. Although really like the product and would buy again
M**0
Broke after six months
Installed OK, and used it for six months for hand soap. But then the pump handle came off and it won't go back on again. Tried screwing it back in, pushing it down, and all kinds of ways but it just won't work any longer, and just comes off again each time. Disappointed.
L**A
saves money.
Bought a Zalava soap dispenser pump a few months ago for hand washing and found we were saving a small fortune not having to buy small bottles of hand wash so we bought another one for washing up liquid, these two pumps are connected to 5ltr containers under the sink and are cheaper to buy this size.The dispensers are good quality easy to fit and deliver a measured shot of soap.Just need a metal hole cutter to drill through the sink very cheap on amazon.
M**N
Tip of your struggling to get this dispenser to work.
Right, before you throw this into the bin here's a tip if your struggling to get this dispenser to work.For the life of me I couldn't get the dispenser to suck up any hand wash. It worked with water so thought the hand wash I was using was too thick so tried another brand but the same thing.Pumped the dispenser until I was exhausted but still no joy. Took everything apart and put back together making sure everything was right. Again, nothing.What worked for me was too charge the dispenser first. I removed the tube and dropped the end of the chrome piece right into some hand wash and after a couple of pumps out it came. Reconnected the tube and all worked perfectly.Not sure why this worked, but it would have been so much easier if that was in the instructions.The dispenser is actually very well made, feels solid and easy to use but because I spent the best part of two hours messing around with what should have been a 5 minute job this only gets a low rating.Would I but again, yes, now I know how to get it to work.
Trustpilot
1 week ago
3 weeks ago