Nilight Front Bumper Compatible for 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Jeep Wrangler JK/JKU Rock Crawler Fog Lights Hole Winch Plate

**Before purchasing this bumper you need to evaluate your needs. If you are using this bumper for light winch use or just solely for appearance/aesthetic, this will be perfect. On the other hand if you are constantly using your winch and need the bull bar, this bumper wouldn't be ideal. **My review is 5 stars because I won't be doing any heavy-winching or utilizing the bull bar much.CONSTRUCTION - 4/5: The construction and choice of materials is okay, basically you get what you pay for. The steel is okay at best regarding thickness and as previously mentioned the Bull bar isn't the best, It's secured via only 2 small screws; you won't be able to do much heavy work with that. The "Two-stage textured black powder coating" they mention is basically just some spray paint which will come off easily if lightly scratched even with your fingernail. In my case the corners of the bumper already were a little scratched and the coating already came off.INSTALLATION - 5/5: The installation is extremely simple, the hardest part for 90% of people will be just to remove the old bumper and getting those rusted bolts off. Apart from removal of the old bumper, all you need to do is create your own wiring harness (many videos on how to do that on YouTube) and install the bumper which slides right in. Tighten 8 bolts and you're done. Shouldn't take more than an afternoon of work and requires simple tools which most people have.LOOKS/AESTHETICS - 5/5: Once installed, this bumper looks phenomenal (see pictures). I love the sharp squared-off look that this bumper provides and it will compliment any Wrangler beautifully. The array of fog-lights look awesome and provide a lot of light when needed.PRICE: 5/5: For what you're getting, the price is absolutely amazing. When purchasing I shopped for various options and of course there are basically identical bumpers on eBay for around $100 less, you won't be getting the same purchase protection for Amazon and warranties from Nilight. These two factors alone justified the $100 price gap between Amazon and eBay as if anything goes wrong, either amazon's phenomenal CS team or Nilight's warranty will back you up.OVERALL - 5/5: This bumper is an easy 5 stars due to all of the points mentioned above, from easy installation and amazing looks/price to good build quality and a solid warranty. This is my 3rd bumper from Nilight and every time they deliver beautifully, they never fail to amaze me.

This is a great sturdy bumper. Lots of room behind to run wires or whatever and keep it protected. I am impressed. Only had it a short time but well laid out. OEM Fog lights was a nice touch! Mounted 12k Badlands Winch easily and the front camera was easy to install as well. I like how it is not "In your face" but very functional for off road.Install was super easy. Find the bolts to remove the old bumper after removing the connection to the Fog Lights, move the fog lights to the new bumper, mount it up, and done! Fog Light wires fit, however, just barely. Had a bit of work to do there, but 10 minutes maybe. Total install, taking my time, two hours.One thing I upgraded was the D-Rings, these in the pic are the galvanized ones that came with it and I upgraded to some black ones. I really like that look a lot better!The Winch was easy to mount and route the wires. Did take a bit of time to decide where I wanted the on/off switch, but decided to put it under the hood by the battery. Works well!I had a License Plate bracket that took two self tapping screws to install. When I go off-roading, I will be able to easily take it off so it does not get damaged. (Don't remember where I got it, but any of them will do). The front camera (hard to see) mounted nicely above the License Plate but below the winch where it will not be in the way.Note, did have my German Sheppard supervising the whole time... She likes it as well!

Just finished with the installation of the bumper & winch. The winch was not purchased through Amazon. A little about my Jeep. 2008 JKU. 2.5 inch lift. Was looking for a bumper to add a winch.Review:Packaged nicely. No issues with the product out of the box. As others wrote, holes lined up great for bumper, fog lights, and winch. I bought the fog light extension wires. Even though some noted they were not needed, I felt it made the install easier. I was able to salvage the plastic undercarriage, too! Rears connected to stock holes. I used zip ties for the front.Winch installed easily, with the winch and fairlead holes lining up perfect.Install Tips:I'm in my 60's and was able to do this in the garage by myself. Whole thing took me 3 hours.Could've cut down an hour if there was more room to get the nuts on the bolts for the fog lights. That was a bear! You have to be ambidextrous to get the fog lights installed. You'll need a 2.5 m allen and 8m box wrench to hold the nut on a couple of them. Others, you need long fingers and lots of patience.Swivel head ratchet with extensions and deep sockets, helps with the bolts and nuts for mounting to the bumper.Lastly, I broke 10 drill bits drilling 2 holes for the license plate. It would've made a world of difference if they'd have those pre-drilled.Overall, happy with the purchase, install and product. Would recommend to other early JK owners.

the front bumper looks great. taking off the stock bumper was probably the most difficult part. The stock fog light mounted ok, it would help to have little hands (I do not have little hands). You do need to buy nuts & bolts to mount the fog lights. Once you get the bumper off and mount the fog lights (before you mount the bumper to the jeep). It was pretty quick after that, took less then an hour at that point. I just wish there was a lower brush guard available for more protection.