2 Pairs DJI Genuine Plastic 9450 Self-tightening Propellers for Phantom 3 OEM in New Clear Pack

I recently bought the DJI Phantom 3 pro and I wanted a fresh new set of propellers. These props are terribly balanced and made my drone shake and wobble very badly during flight. I almost crashed my drone trying to land it due to the intense shakiness I could make a video if anybody would like any proof. I did some further inspection and I held the drone on the floor so it would not take off and I noticed the two black props were vibrating like crazy. I made sure I put the silver and black in the correct location and yet this did not work. Very dangerous! I would recommend you to stay away!!!

I have not flown with these props. But many of the more recent reviews call their authenticity into question. When compared to the stock props that came with the phantom, and the replacements I ordered from the DJI store, As one of the other feedback outlines, the color is off, size and font of the markings do not match the DJI props, so I tend to agree they may not be DJI OEM.

100% FAKE. Do not buy these. I tried balancing them but couldn't even get it threaded onto the shaft. After closely looking at the markings and comparing to my original props that came with my P3, I can conclude 100% that these are fakes. I would never put these on my phantom. There's no telling what kind of plastic they are made of. They could snap in mid-air.Lesson learned.

I purchased mine here from the seller, "Random" I have 3 packs of these directly from DJI and they spin on VERY easy just by flinging them with 1 finger (see the official DJI YouTube tutorial for how easy they are to spin on). These? Man, they were so hard to screw on it was ridiculous. Then, I couldn't get them off. They were also far less balanced than the ones I got straight from DJI. So, are they fake? I don't know. Everything I read about fake propellers has these same exact problems. The packaging looks legit, the propellers have the DJI logo and they had the plastic over the hubs. Are they a bad batch? I don't know but I won't be buying again. I see another reviewer with the same problem. Even after I got them on my P3, I still can't get them all the way screwed onto my balance shaft. Never again!

These appear to be authentic to me. They provide more lift than the stock blades that came on my Cheerson CX-20. They screwed down on each motor without any problems and the rotation was correct. One nice thing about these propellers over the stock propellers is they have the propeller nut built into them and I am sure DJI owners know this, but if you are wanting to run them on a CX20, this is to let you know. The printing was clear and crisp. The propellers are smooth and well made. They are easily twice as stiff as the original cheerson propellers. The quads performance when using them was more stable and responsive. It maintained a locked hover with gps easier using these propellers. I will and plan on ordering more of these because they work so well

There's not a ton to write about these. They're original DJI propellers for a great price. I crashed my Phantom 3 Standard into a cliff in November and just got around to repairing it. In addition to four new props I also needed to replace a motor and both 2.4GHz antennas. Got it all fixed, installed these new props and it flew as expected.

I use these on my Cheerson CX-20/Quanum Nova and absolutely love the extra thrust they provide. These came perfectly balanced right out of the box and since they are self-threading, putting them on was a breeze. Even with the added weight of my Walkera G-2D gimbal and a GoPro (a total of 1.22kg), I found the flight time increased by about a couple of minutes with 3000mAH batts.. 100 plus flights later these are still going strong and I've had to balance them just twice. They have survived numerous crashes and bumpy landings. I do however, recommend balancing these with scotch tape rather than by sanding them.

This is the second time I've been shorted props.Btw they are dji props. Their just the upgraded ones and should be tight so they don't come off in mid air when you hit the breaks.

Item was described as DJI Genuine Product, but it is NOT a genuine product - it is a FAKE copy of the product. The item description stated "Propellers in original DJI packaing with retail sticker&DJI logo branded", but the packaging that arrived did NOT have the DJI Brand or Sticker. Comparing the product to the GENUINE part that came with my original DJI Phantom 3 Pro I can see that the plastic texture is different, the markings are different, and the hub is a different shade of metal. Also the hub was not shrink-wrapped with plastic like a real DJI item would be.Product is fake.

Not sure what happened to the reviewers who said they had gotten ingenuine DJI props, but mine arrived in genuine packaging, and seem to be genuine propellers. I can't test them right now as my phantom has a dead motor that needs replacing, but if I remember to update this review, I will add how these fly.

I was nervous after reading some of the other reviews here that the propellers would not be genuine. But after receiving them and comparing to another new, unopened set bought elsewhere, I can confirm that these are indeed genuine DJI propellers. Or else they are the best fakes I have ever seen. The packaging is identical, and the props themselves are exactly the same. I flew my Phantom 3 with them yesterday and they perform exactly as expected.

Truly are genuine DJI props. (July 2021) comes in genuine packaging but also has DJI on the props them selfs.

Super quality, Good Product......... Just go for it.