Table Saw On -Off Toggle Switch SW7A Comptible with Crafts-Man OR90037 Delta 489105-00 Ryobi 46023 WDP1850 Drill Press Dewaltt Crafts-Man Ryobii Table Saw Parts
Description
- Compatible with Ryobi BD46023 J-9301 E156275 Craftsman OR90037 OR9OO37 0R90037
- Replacement for: 489105-00, 46023, 901801,1344600,400060680002, 903981, 1343759, OR90037, 438010170141
- The part/product is not sponsored or endorsed by, or affilliated with the brands it fit, including Delta, Ryobi, Rid-gid, Craftsman, Harbor, Freight, Rockwell, Grizzly.
- Compatibe with 489105-00 11-900 11-950 11-980 11-985 11-990 14-040 17-900 DP400 DP300L 17-950L 34-670 36-600 36-977 36-978 36-980 36-981 TS200LS 36-982 BS100 BS220LS SM200L SM400 TS200 TS220LS TS300 TS350 22-540 23-655 23-675 28-150 28-195 28-560 31-325 36-977 36-978 36-979 36-980 36-981 36-982 37-275X 37-380 46-715 31-120 31-250 31-252 31-255X 31-340 31-460 31-695 31-750 31-780 SA350 SA446 SM500 Sander, 22-540 22-560 22-565 22-580
- Specification:125/250V; 20/12A; The toggle switch is suitable for the opening 7/8" x 1.5"The swith is made of high quality which is tested by manufacture.
The following is the adapter model： 11-900 Type 1,11-950 Type 1, 11-950 Type 3; 11-985 Type 1, 11-990 Type 2,14-040 Type 1,14-070 Type 1,14-650 Type 1,17-900 Type 2,TS200LS Type 1,TS300 Type 2,TS350 Type 1,SM200L Type 1, SM400 Type 1,SM500 Type 1,22-540 Type 1, 22-560 Type 1,22-565 Type 1,23-675 Type 1,28-150 Type 2,31-120 Type 2,31-325 Type 1,31-340 Type 2,31-460 Type 1,31-460 Type 3,31-695 Type 2,31-780 Type 1,34-670 Type 2,36-600 Type 2,SA180 Type 1,SA180 Type 2,LA200 Type 1,SH100 Type 1,AP300 Type 2,GR450 Type 1,GR275 Type 1, GR250 Type ,TP305,DP300L,50-075 Type 1, 50-665 Type 1,DP200 Type 1,DP400 Type 1,46-250 Type 2, 36-610 Type 2,36-380 Type 1, 34-695 Type 1,34-570 Type 1, 43-505 Type A,43-505 Type 1, TP300 Type 1,50-775 Type 1, 37-285 Type 1,37-190 Type 3, 37-190 Type 1,SS350 Type 1, 40-570 Type 1,40-530 Type 1, 36-546 Type 1,36-545 Type 3,
Reviews
C**R
L9ng term low quality
It was good for the first year of using but after a year I was using it and all of a sudden the switch broke while the saw was on, defenatly not good timing. Quality is not there if you use it frequently
V**.
Perfect fit
This was an exact replacement for the switch on my Harbor Freight drill press.
N**M
Was the right replacement
Replacement of my tile saw switch
M**Z
Used to replace switch on Skil Saw brand table saw
The switch was easy to replace and didn’t take too long to swap out. I was really nervous about taking things apart a bit, but figured it was worth the risk if I could avoid having to buy a new table saw. And things went relatively smoothly. It’s worked just fine since.
R**E
SW7A: Perfect drop-in replacement for my Ryobi WDP1850 drill press switch
This SW7A switch is a perfect drop-in replacement for the power switch on my old Ryobi WDP1850 drill press. It extends outwardly about 1/8" less than the original (no problem there), the lock plug is yellow instead of the original red (no problem there), and has a SPDT (two separate-but-linked switches) arrangement rather than the original SPST switch, is better than the original. I can connect one of the SPST switches to my original push-on connectors, keeping the second SPST switch unused, waiting for the day when the first switch fails, as the original just did, and move the connectors over to the second functioning switch connectors.(I should add that the problem with the original switch failure was that one of the connector tabs, which was attached the switch body via a rivet, failed when the rivet fatigued and broke free (see picture). The switch's internal mechanism was just fine. It was the connector that let go, causing the failure after about 20 years of usage.)
W**S
Couldn't obtain this item in Australia
I was very happy to be able to access this product and have it shipped to Australia. This item was unavailable in Australia. I received the item and immediately installed it into my faulty sanding machine . Now it works a treat and no need to purchase a new machine . A substantial saving for me. Much thanks.
T**.
Perfect fit
Good value for the price
M**N
It's definitely a switch
It fit almost perfect in my old Delta 10" table saw. Wiring was easy enough. One star removed because the safety lock is very difficult to remove, I pretty much have to pry it loose. It was also a little loose in the body of my saw but that also could be just the saw.
K**H
toggle switch
works just like old one.
Common Questions
Trustpilot
2 months ago
2 weeks ago
