Zodiac MX6 Automatic In Ground Pool Cleaner

I've had this product for 6 years now and it's performed well for me. I did replace the tracks after 5 years as they were super worn out. The only problems I have with it is that little twigs or pieces of mulch will lodge in it and keep it from working which only happens after a good storm or the landscapers with weedwhackers sling a bunch of bark in the pool. Every time I think it's broken and gone bad, it turns out either there's debris caught in it or there's a flow issue (filter is full, air is leaking into the line, or something like that). Usually, I can pop out the debris with my finger but once every year or two I have to take it apart to pull something out of the guts. The hose that comes with it degrades after 3 years and has to be replaced and the connections only fit with their proprietary hose. You can Macgyver a standard hose to fit if you have extra lying around but it is a little heavier and might cause it to pop wheelies at times. I have not had to replace any other parts yet on it. I've only had one other brand but this one has outperformed that one by far!

LOVE this VAC!!it s the real deal,climbs on WALLS, stairs and leaves the pool spotless.I have gone through at least 6 pool vac cleaners, and each one some refurbished and some brand new.And it was same type same problems and with 1year or less, it needed repair.same replacement parts.Now I know things break down, however this is a repeated pattern with certain types of pool vacs.so I decided I was going to do some research and came across a client who had this particular zodiac vac and his pool was gorgeous, so I just took a leap of faith and bought it and put it in my pool and it's running like a charmI couldn't be more happier.thank you so much for making a decent machine that works and keeps its promise to do exactly what you advertise it to do.thank you

Here’s a more detailed and comprehensive review based on the provided input:---**Zodiac MX6 Pool Cleaner Review**I had high expectations for the Zodiac MX6, and while it showed promise initially, my experience with this cleaner was ultimately disappointing and concerning. Here's a detailed breakdown of my experience:**Shipping and Setup**The Zodiac MX6 arrived promptly, and the unboxing experience was smooth. The directions were clear, and setup seemed straightforward at first. Following the instructions, I connected the hoses and carefully ensured everything was in place before placing the cleaner into the pool.**Initial Operation**To get the cleaner to work, I had to fully close off the main drain and skimmer. This step was necessary to allow the Zodiac to function without climbing the pool walls uncontrollably. While this requirement was manageable, it felt like an inconvenience compared to other pool cleaners I've used. Nonetheless, the robot started cleaning as expected.**Design Flaws and Performance Issues**The major issue I encountered was with the design of the Zodiac MX6's hose and connector system.Specifically:- The hose allowed air to be sucked into the line through the plastic connectors.- I tried both the cleaning port and skimmer attachment, but neither resolved the air-leak problem.This design flaw proved to be a significant drawback. Within 30 minutes of operation, I checked my pool equipment and found the pump running dangerously dry due to the air being introduced into the system. This could have caused serious damage to the pump if I hadn’t intervened promptly.Despite multiple attempts to adjust the setup and troubleshoot, I could not resolve the air-sucking issue. Each time I restarted the Zodiac, the problem persisted, making the cleaner unusable without risking damage to my pool equipment.**Effectiveness**When it functioned briefly, the Zodiac MX6 did a good job cleaning the pool. It moved efficiently and picked up debris effectively. However, the trade-off for this performance was simply not worth the risk of damage to my pump and filtration system.**Final Thoughts**While the Zodiac MX6 is an innovative and potentially effective pool cleaner, its poor hose design and tendency to introduce air into the pool system make it a high-risk option. Pool equipment like pumps is expensive to replace, and no cleaner should compromise the integrity of your system.For anyone considering this model, I strongly advise researching this air-sucking issue further. Unfortunately, I cannot recommend the Zodiac MX6 due to the significant risks associated with its use.**Pros:**- Cleans the pool well when operational.- Easy to set up initially.**Cons:**- Requires closing the main drain and skimmer, which adds inconvenience.- Faulty hose design allows air to enter the system.- Risk of severe damage to pool equipment.- Repeated attempts to troubleshoot did not resolve the issue.**Conclusion:**Stay away from this model unless Zodiac addresses these design flaws. It’s simply not worth the potential damage and hassle.Note: The vendor has a VERY hefty restocking fee. If I were to look for a robot/cleaner like this, I would visit a local pool shop and ask to have a demo of a system BEFORE purchasing.I would NOT buy from this vendor again.

For the money, this sweeper works pretty well. It is good compromise for getting the job done. HOWEVER...this little unit needs a good bit of regular attention, especially if your pool gets stringy or chunky debris. I'd guess that applies to all pools. Stringy items like palm tree leaves, or those pesky larger seed pods from trees will jam up the works of this sweeper. Stringy items can get wrapped around the axels and cause the sweeper to either stop or slow down to a slow crawl. That being said, if you're handy and don't mind giving it some maintenance from time to time to clear out those types of items, even getting deep into it, then this is an OK sweeper. When it is operating without any issues, it really gets after it and does a great job. Now, the hoses that comes with it - that is another story! The twist and lock-in leave a lot to desire and are notorious for leaking and letting air in the system. Stick with the old fashioned plug-in connect style if you can.

Very pleased with this vacuum. We have had it for about 2 months. It is a total upgrade from the previous Haywood navigator vacuum that was provided to us by our pool builder. After several years the navigator was slow and not reaching areas of the pool. This new vacuum is amazing. It makes its way around the pool with ease. It is able to climb from the deep end ( 8ft) to our shallow end of the pool with no issue and moves around the entire pool with each cleaning. Currently my filter is set for 2 hours on two times a day. Suction is great, directions are clear on how to set up and easy to install. The Vacuum climbs the wall of our pool nicely. It has not made it up the pool steps though per information provided that state it will. The interlocking hose pieces are very nice as well. Minimal to no air leakage occurring. Highly recommend.

Works great for me, after I figured out (by watching u-tube) how to set up in my side feed pool. I need another piece to stretch to the full length of my pool. It is quiet and does not jerk on my pump.