Galaxy S10 Tempered Glass,S10 Screen Protector,Fingerprint Scaner 3D Transparent Clear Full Curved Edge Case Friendly Anti-Scratch Coverage for Samsung Galaxy S10 2019-2 Pack

When installing be sure to watch the installation videos on youtube. Don't bother trying to read the instructions that come with it.Installation process:After dropping the glass on the phone, do not take out the phone from the installation tray BEFORE initial curing. Let the UV light cure the glus first just to harden it a little bit (15sec top and bottom). Then you can take it out from the tray to wipe off excess glue that ran to the sides.Dont forget to hold tour finger over the reader for one minute after initial 15 secc cures.keep in mind you'll need to re-register your fingerprints after installing the glass

5.12 Update: 2 weeks later! Fingerprint still responsive, screen sensitivity is great, no problems!Pros:1. Great screen protection 2.Great sansitivity 3. Great seal 4.looks like it's part of the phone. 5. Easy to remove should you have to replace it.Con; Can be a bit tricky to install, takes some time. I recommend you watch the installation video at yotube. You should have no issues.After everything is done I like it, minus the fact that my case is ruined. Typing 30 minutes after the install and screen protector feels great.Smooth and not sticky. Covers the screen really well. Fits the Spigen Liquid case with no issues.I will update this review over time if issues arise.

I love the tempered glass screen protectors that dont have the cut out for the front facing camera. The glass does not impact the camera performance so you can put your mind at ease. Also, the finger print reader in the screen does work with this. The installation can be a bit tricky, but if it's done right then this is one of the nicer looking protectors on the market.I unfortunately had to order another set due to bubbling that occured on my installs. Dont let this discourage you, I believe this is due to user error on my part. The only reason I'm not giving this a perfect 5 stars is because the curing process is misleading. It says that the LOCA for this product only requires roughly 60 seconds to fully cure. When I took the protector off (because I hated the bubbling issue that I had caused) I found that even after the recommended 60 seconds the LOCA was still fairly liquidy rather than more of a glue. Before I took it off, I did double let check that the in display finger print reader worked and it did. You will have to go into your settings and redo your finger prints though. That being said, I would say divide your phone up into 5 sections and do 60 seconds each section for a total of 5 minutes of curing. I know it's time consuming but other products similar to this that i have used recommended this and it worked every time.Speaking of other products, the price point for this is a steal. The whitestone domeglass sells for about $80 for 2 tempered glass while this is half the price for the same amount of tempered glass pieces! I will say the whitestone has this beat as far as "ease of use" when it comes to the install but i think this looks way better than whitestone.One last thing to this lengthy review. After you unbox your tempered glass, check to see if it'll fit with your phone case. The protective film on the glass doesn't overlap past the edges of the glass so you'll be able to line it up on your screen before even needing to install it. This will at least tell you if it's going to work with your case and will also help you understand how it should be aligned during the install process so that it will continue to work with your phone case.Hope this helps out!After my replacement comes in I will try to upload some pics and maybe even a video.

I was a little hesitant to purchase this due to the price but i am sold for the future now! You cannot get good adhesion with 'normal'' screen protectors on curved glass. I did not want the file protectors since i did not like the feel and the reports of the corners still coming uo,Kooking on the internet,i found this and was skeptial at first for my last few phones, i always got the cheap glass protectors(3 for $7) so this was a little pricey for me.When I first opened the box and realized how complicated the installation looked, I was a little nervous. DEFINITELY watch the tutorial on YouTube, it makes things much easier to figure out and ensure you install it correctly. It's fairly simple, and the video is only about 6 minutes long.Anyway, onto the product. Let me say, it feels like I'm not even using a screen protector. It's perfectly clear, and the use of the "liquid glass" glue application even filled in a pretty deep scratch on my screen (and a bunch of smaller ones), so my phone looks even BETTER than before! There's no leftover glue residue on the edges, so it looks nice and clean.Extrenely happy with my purchase.Hopefully is lasts! (if i don't update this to say otherwise,then it lasts)

This is my first ever review on AmazonI have never used a screen protector like this before. I typically like to use the old school plastic types.I started to see all the videos/reviews about this screen protector and decided to gamble my money on trying it out. Follow the instructions . After you have placed the screen protector on your phone, and after the first 15 second curing. Take the phone out of the tray and wipe down any excess adhesive. PUSH DOWN ON THE FINGER PRINT SCANNER FOR 1 MINUTE! Very important as this will enhance your fingerprint experience with this screen protector. It is more accurate at picking up my finger print now andEdit: I want to edit this and talk about the fingerprint.This protector support fingerprint scanner and if you have a little patience during the install and follow the directions, the outcome will be well worth it.