Shop FoxD4333 Clamp Rack Set, 3-Pack

Heavy duty and holds several different types of clamps. I highly recommend this item

Simple, perfect and fits all my Bessey clamps. I want to buy more but will have to buy more clamps too, which is chill

I love just about everything about this multi pack of clamp racks... except the pipe clamp rack. I don't have any pipe clamps. Honestly, I wish I could have gotten a decent deal on a 2-pack, rather than the 3-pack. I wanted a parallel clamp rack and f-style clamp rack, and this pack was the lowest cost option to get those two. The alternative was to get a 3-pack of either the f-style or the parallel rack and a single of the other one, or to get two singles. If they came in a 2-pack, I think I probably would have ordered two 2-packs of them, since I have a few too many clamps to fit in the two racks.Leaving aside the extra pipe clamp rack that I have no use for (it's an inefficient use of precious wall space for parallel clamps), the racks themselves are quite good. It's heavy gauge powder-coated steel, and even loading the thing up with 12 heavy parallel clamps there's no sense of flexing or instability.The top two sets of holes are 16" on center, but in my garage the studs are 24" on center, so I had to put a strip of longer plywood behind the rack, screw the plywood to the studs, and screw the rack to the plywood (see pictures). A minor inconvenience, really. If the rack were an inch or so wider and had the bottom set of holes right near the edge I wouldn't have even had to do that.All in all, I'm quite pleased with the racks. The alternative was a bunch of time at the band saw making homemade plywood racks, and I had enough of that in my old shop. It's worth ~$35 to me to save that time. Anybody need a free pipe clamp rack?

These are really great clamp holders. I have just put up 2 of them on the header between my 2 and 1 car garage, plenty of head room. The third will go on the back wall of the garage for the longer 36" clamps. I used 2-1/4" hex head bolts instead of the suggested screws, one because it was easier to screw in with a socket wrench, and two, I won't tear up any screws with a Phillips screwdriver, as is often the case with heavy screws. This way, I can always take them down if needed. I thought at first the sheet metal would be pretty thin and wouldn't hold up to all the clamps, but when they arrived today, I found the sheet metal is a very sturdy unit that would probably hold my weight, let alone a rack of clamps. These will last a long time. It also saved me a lot of time having to make my own clamp holders out of wood, especially since I am just setting up the wood shop side of the garage and don't have the time for that. So for me, the money was very well spent. I just wish they sold them singly as I also needed a pipe clamp bracket, so I bought one from Rockler. I had a 20% off coupon too, so that was a nice bit of savings.So, in all, I would highly recommend these. Too bad you can't buy just one.5-27-18 update. Still holding and working great. I love them, I can easily find the clamps I need as they are always in the same spot, whereas before, I just had them like all over the place. Perfect item to have in the shop. I still would like to see them sold as individual brackets for those who don't need all three.

it's metal. it's sturdy, just didn't need 3 of them for my shop. would have liked a mix/match choice as I would like a single for my pipe clamps resulting in 3 items: 2 for parallel clamps and one for pipes. Not an option.

High quality, very sturdy and does exactly what it is supposed to do. I don’t use F clamps, but I use the rack for my C Clamps (see the attached photo). You’ll need fasteners as none are included.

Seriously life changing not having to battle a drawer with awkward clamps in them anymore.

This clamp rack variety pack is a nice piece of kit, and I've already filled them up. I screwed these clamp racks into a 2x4 with 1-1/4" pan head screws - the 2x4 is screwed into studs in my garage wall with 3" construction screws, 2 per stud. Here's some information about my own clamps that might help you determine which size(s) you need:1. Pipe clamp rack: Fits Jorgensen 3/4" pipe clamps, Generic 1/2" pipe clamps, and Jorgensen I-Beam clamps,2. Parallel clamp rack: Fits Jorgensen heavy-duty F-clamps well, Jorgensen I-Beam clamps fit a little snugly.3. F-style clamp rack: Fits Generic craftsman F-clamps (shallow throat) well. Bessey medium duty F-clamps somewhat fit. Dewalt track saw clamps fit, but I had to clamp them to the rack "teeth." Light duty Jorgensen or Bessey would probably fit well.These clamps didn't fit: Heavy, deep throat F-clamps (old Wetzler), Wooden screw clamps.5 stars for getting clamps off of my shop floor.

These racks hold a lot of weight - what I was looking for in parallel clamp racking.

These are great. Has cleaned up all my clamp storage on the wall. Love them.

Quality product.. would buy again

I was a bit worried when I ordered these as my pipe clamps are really, really heavy. But this Shop Fox clamp set is rather strong. High quality materials used. Very sturdy. Tucks up against the wall nice and close.

I like the powdered coat finish on them. Wish they were sold in a two pack.