Oladwolf Basin Sink Waste, Modern Pop Up Click Clack, Nickel Plated, Solid Brass, Unslotted Design

I'm not a fan of these popup pushdown sink drain valves as they generally want to rot from little use and eventually refuse to open. This unit was a superb replacement in terms of fitting and to date (six months) has performed perfectly.....it definitely has a feel of good quality about it.

This is a strong item which does the job - I intend to buy another in the nest few weeks.

The product was great easy to fit and does the job. The only reason why it was 4 and not 5 stars was that the overall length of the waste was shorter than the one that came out, so I had to change the trap in order to get it to connect. I do not know if there is a standard length? But apart from that the product was great.

The product arrived with a set of basic installation instructions. The key is ensure that ALL remnants of residual sealants in the waste opening are thoroughly removed. I used a small amount of boss white for the waste opening but not for the large nut and tapered rubber washer underneath the sink.It took more time preparing the waste hole than fitting the new waste, which took only a few minutes. Tightened everything up and tested with running water and then with the waste closed and the basin full of water. No leaks at all, very pleased.Remember this pop up waste is for a basin with NO overflow, if you have an overflow then you need a slotted waste fitting instead.

Every one of my sinks and the bath have click-clack waste, which I far prefer over plug and chain, much neater too.Unfortunately, there are varying quality products around, and I had to replace (a not very old) one in the cloakroom. The chrome had started to lift slightly, and the mechanism wasn’t as smooth as it should be – very poor.I bought this to replace the defective unit. It should be remembered that this is UN-SLOTTED, for sinks that DON’T have an overflow (which my cloakroom one doesn’t). There are some great features with this one, e.g. it has a METAL (brass) fixing nut, which many don’t. This is something to watch out for – many have nylon locking nuts, which often prevents from a good solid tightening.The best thing with this is that it is nickel plated brass, which tends to be fare more resilient to peel / wear than chrome, and is definitely the way to go. Just be aware that the finish of nickel plate is a little different to Chrome, not massively so though. The image in the product description looks more like chrome.This was very straightforward and easy to fit / retrofit, and of really good quality, and excellent value. I really recommend this product, beware of some cheapo products! I Expect this to provide many years good service.

All the bits, works great, no return which is what we needed for our sinks

Easy to fit, seems good quality, but the rim is about 3mm high. The one it replaced was 1mm so it depends on what you are fitting to, but it should be mentioned in the description/specs.

This waste plug was promoted on Amazon as good to buy with the sink unit I bought. Totally wrong size and plumbing for the sink. It looked good and felt sturdy but a total waste of my money as it couldn’t be used.