SEBSON Mini PIR Sensor Indoor, Ceiling Flush Mounted for Installation, LED suitable, Infrared Motion Sensor, Range max. 6m/360°, Programmable

Fitted 2 to wardrobes work wellGood productReasonable price

The media could not be loaded. I used two of these in my kitchen two years ago to automatically turn-on coving mood lighting when entering and turning off when the kitchen isn't occupied. They have worked faultlessly.So it was a no-brained to use one on my recent shower room reform. It is ceiling mounted, automatically turning on the ceiling lights when entering and turning them off automatically when unoccupied. Additionally it is wired to the extractor fan (a timer model). So the fan also turns on automatically with the lights, then turns off 30 minutes later.... So no switch required.Easy to install, very small unobtrusive sensor, works great.Perfect 👍My only criticism is that the wires from the unit to the sensor is very short in length.

I have bought and used several of these over the years. They are easy to set up and are all still working well. Only criticism would be the retaining thread on the sensor is too short so you usually need to glue them in place.

Good product for lights in WC, Corridors etc. Easy install.

purchased for auto cupboard light under stairs .. easy connect and perfect for project t

As always there are pros and cons.The pros are;Small, easy to install and works reasonably well in terms of detection and switching the load.The cons are;The sensor head is a bit flimsy, you really need a bezel to fit it in (I 3D printed one). You need an area behind the sensor to fit the control box. I made up an extension lead but it wouldn't operate with a 5M extension (and yes, I checked the lead for continuity and polarity, still no luck). The off timer was a bit hit and miss in terms of the stated times.In short, if you can fit the sensor head about 8cms from a void behind where you install the sensor you're golden. Although I set it up on the bench and tested it for some time, the short lead meant I couldn't use it and found another solution.

My electrician wired this in as a solution to switching plinth lights on a kitchen island as wiring them into the main circuit had been overlooked.It’s adjustable but not infinitely with a dial, it’s just 2 position switches but I’d expect you’d be able to set it to the majority of uses.It picks up the slightest movement, the lights come on before you’re even in the kitchen and stay on for a few minutes after being tripped which is how we wanted it set up.I only briefly looked at the product but I’d say you would need a bit of skill or at least be prepared to work out how to wire it in- certainly not what I’d describe as plug and play.

An excellent product with good features. I wanted to upgrade some passive led lights fittings. Unfortunately, this product is around 26mm tall so I couldn't get it in. That said, I'll hang onto it and use it elsewhere. Otherwise, straightforward to fit.