Bushwacker Trail Armor Cowl Guards | 2-pc. Textrd. Black | 76129 | Fits 2018-2024 Jeep Wrangler JL Rubicon/Sahara/Sport/Sport S; 2020-2024 Jeep Gladiator Launch Edition/Overland/Rubicon/Sport/Sport S

If you have steps or rock sliders (depending on the style) already on your Jeep installation will be a bit difficult. If you have nothing, installation should be easy! But because I had to wedge them between the sliders and the body, I had to leave the cover on the double sided tape and then attempt to remove it after it was in place. Also, what helped (and I figured this out after doing one side) is to release the limiting strap on the doors, so you can open them up over 90 degrees, this will help since they have the integrated sill protector. For just some pieces of plastic, I like the protection it adds for the area of the body that is exposed after removing the OEM Rubicon Rock Rails to install after market rock sliders.

This was a perfect fit for a 2023 Wrangler 2 door. I have used bushwacker parts before and they are good quality. This was good neat finished edges and looks OEM. Just know that this covers up all the holes under rocker where you would need to put the bolts through for mounting running boards. It should be easy enough to drill out the holes since it is just plastic if you do want to mount running boards.Be very sure to clean all the surface where you will be gluing this onto to make sure you get good adhesion. that is critical to a proper installation or else the adhesion will fail. This is the case with anything for automotive where you are using 3m double side tape.Lets see how well the glue holds up over time. Overall happy with the product but I feel it is a bit overpriced. But ultimately you get what you pay for. I will update this review if i have any issues.

The media could not be loaded.  I recently started noticing lots of wear on my rockers from entering and exiting my Jeep Rubicon JLU and already have the fender delete kit installed made by Bushwacker. Super happy to find this set of rocker covers. I thought they were easy to install after I pre-fitted them. Came individually wrapped in a cardboard box and was delivered fast after purchase. Totally like these and will recommend them to other jeepers.

Unless you trim the passenger side cover the taillight won't fit back on.

Installed on a 2018 JL 4 door sport. Took less then an hour to do. This is the second jeep I've done and they really tighten up the looks of rocker panels. The covers hide unsightly bolt holes at the bottom of the rockers, and protect the sill tops from boot scuffs. It is important to thoroughly clean the area where the guard is going to go on with rubbing alchohol. You are supplied with a couple small towlettes, but I used more on a towel. Install at warmer temperatures. "Pre-fit" with the adhesive tape covered because there is a little wiggle room front to rear. I used masking tape to hold and align them. Worked great. I give this little project a "10".Scott

These are fine. They must have changed the design, I've seen installs where it's one piece, mine are two that butt together for the 4 door. I'm guessing you just get the front section now if 2 door but I'd prefer if it had been one single piece.Long strips of double sided stick hold it in place, I cleaned all the surfaces first really well, definitely do that. No holes for mounting with rails, I drilled my own. Not a problem and worked just fine. I'm not sure if I'd trust them or not with just the stick on, for sure not if you go off-road at all.The site says something about how these will "add extra strength" which is bonkers lol. They are plastic stick on pieces. I dented a rocker panel and this was an affordable way to cover that and I'd wanted to put sill covers on also so this covered a lot of bases.

Great little accessory to jeep. Not sure why it indicates that it will not fit a Gladiator JT. As you can see it's a perfect fit. Would recommend for Gladiators.

Worked great, fit perfect.

Super easy to install with a very good 3M adhesive.Looks very nice.Only flaw, the guards cover the bottom screws of the cowl, so I you need to access them, you will either have to remove with a heat gun and destroy the guard or pierce wholes on the guards to access the screws (which I will have to do...They should make the wholes covers screwable or something.

Love the look and protection it offered BUT it holds all kinds of debris behind it. Salt, sand etc. I removed them with the worry it will cause corrosion. Probably good for a state like California but not good for a Canadian jeep

I shopped around for these rocker panel panel protectors, great price and quality. A bit of the adhesion is coming off of one but it is winter in Canada so I kind of expected it to take a beating.

fit très bien sur mon jeep jl et facile a installer

49$cad Waterhouse deal so it's nice