FogStop by Raleri Universal Motorcycle Helmet Anti-Fog Shield Insert Lens (Standard (11.25" x 3.74"), Clear 100S)

I have the AGV K3SV. I've been looking for the pinlock visor and inserts for over a year. No one has them in stock... Anywhere, ever. I didn't even think about looking for a different brand or option until stumbled across this little gem. The Raleri universal insert fits and works perfectly. Instead of buying a new pinlock ready visor and the pinlock visor, or worse, a whole new helmet, this solves my fogging problem. Installation is straight forward. Just be sure it fits and clears the seals. I used masking tape on the outside to mark where the seals are and to line it up. You can remove it and reposition it if you need. So far, it's holding great and seems to be a permanant solution.

Great product. This is the second Raleri Insert that I've had. Since it's glued to the helmet visor, its the only antifog that really works in the long haul. I've had Nolan, AGV and Shoei helmets, all with original pinlock antifog visor, but after two or three months of use, when a single drop gets in between the visor and the pinlock antifog, it does not work properly anymore. The Raleri insert, continues to work, even after many months, and after very heavy rain. Great product, and I will continue to buy it.

Anti fog works great. From an optical perspective I do feel a little refraction when it is bright. May take some getting used to.

This thing is a game changer! I love it! I live in Seattle where it does rain quite a bit and much like everyone else who rides in the rain, I'm constantly flipping visor cracked and closed or leaving cracked depending on severity of fog. The install can be a little tricky. I'll admit I didnt follow the instructions but just went with my own eyeballing/centering and for the most part I centered it pretty well. My advice is definitely take into account ur visor area NOT in overall space but the area within the gasket sealer of on the helmet where the visor makes contact. Aside from this...BUY IT!! ITS MAGIC FROM THE DEVIL.... But gets me to my destinations with alot more ease and comfort, and less frustration.

I bought this for a helmet I had bought that was around 70 dollars. I've been having a lot of issues with fogging recently here in Ohio with the colder weather as I like to ride my Honda Shadow as long as there is no snow on the roads year round. Decided to give this a try as my helmet was not pin ready. Love it. Adhered really easyily. Went on fast and tight to the faceshield. Zero problems with my faceshield fogging up now even under the most extreme conditions. Love it! Will not have to worry about buying a helmet in the future that is pin ready and won't have to pay the prices for the more expensive fog preventative shields! Worth every penny. Just make sure to tape off your faceshield so you can see where the seals are so it goes on in the right spot.

I'm not sure a perfect no-fog visor liner exists, but after using factory Schuberth and Pinlock 120, this is a better product. A bit of glare/duplication of oncoming light compared with other units, but a fair compromise for better anti-fog properties. No difference for water droplets entering thru vents; they slowly evaporate once the rain settles down. For reference, I commute 65 miles each way, year round, in Seattle area rain and I go thru an anti-fog liner/year since at some point they aren't as good as new. I'd buy this again over the competition.

Make sure to watch the how to video because it shows how to make install a lot easier. The only downside is the double reflection caused by having two pieces of plastic in front of your eyes, but that will be true of any pin lock like insert.

I’ve had it in a few days now and I’m completely satisfied. Ventilation in my helmet sucks, so I’m constantly fighting fogging issues even at speed. Installed this in my shield (took about 7 minutes) and rode to work the next day in the cold and was amazed. There is area around the insert on the shield and when I take my helmet off there is all sorts of fogging on the unprotected shield, but the anti-fog shield has had ZERO fogging so far. Time will tell on the adhesion, but I appreciated that the adhesive allows you to reposition if needed during install, and then you apply more pressure to make it fully stick. So far it seems stuck on extremely well, so I have high hopes. Extremely happy with this purchase, and I’m normally the guy that finds all the little faults in products.

bell eliminatorの純正シールドのシートが剥がれたのでこちらを購入しました。 サイズ感も良く、曇り止め機能も充分でワンポイントのラレリー文字もオシャレに見えていいです！

昨年の走り納めに使用しました。 ヘルメットの外気取り入れ状況にもよるのでしょうが、私の場合、普通に走っている状況では効果はありましたが、渋滞で進めないときは曇りました。とは言っても、付けていない箇所とは曇りのレベルが違いますが・・・。 ピンロックシートを含む曇り止めシートを購入したのは初めてなので、ほかの同種製品がどのようなものか判りませんが大体満足です。 また、私が購入したのはスタンダード(11.25インチ x 3.75インチ)ですが、元々はジェットヘルメット用のようです。 私は視界が広くとれる方がよかったので、この商品をフルフェイスに取り付けましたが丁度よい大きさでした。 不安であればRaleriのHPに型紙があるので、それをダウンロードして大きさ100％で印刷してみるといいと思います。私もそれで合わせてみてこの大きさに決めました。 なお、この大きさだとRaleriの文字は赤色ですが視界に入ることはありません。 また、商品紹介ページでは黄色っぽく見えますが、保護シートが黄色いためで、シートをはがせばクリアです。