KSP 20mm Hubcentric Wheel Spacers 5x120mm with M12x1.5 Lug Bolts fit BMW

So far so good. The fitment is so much better now with extra 20 mm. I don't believe there is a lot to say about the product either it holds up and I will never notice it or if it has any problem I will notice it in the future. Again so far so good and also no complaint from my BMW shop that I was quite sure that they were not going to like spacers and even less no top brand spacers. The packaging was careful and correct the bolts were included which was very convenient and every single bolt was wrapped in paper individually so nothing is scratched. I appreciated the quality honestly. Maybe if you compare it to a top brand that cost three times more and you have a very high performance purpose, or if you don't care about the extra money, this might not be for you. But otherwise if you're going to buy the ECS brand or any other middle brand that cost twice this I wouldn't go for it. Save the money.

Fit perfect on hub. Zero play.2011 335i

Great to space out the tires some. Husband put on his BMW and it looks amazing! Hard to see in the picture. Looks much better in person

I recently snagged some wheels for my E60 that I mistakenly thought were the correct offset. I am not typically a fan of running spacers, but I really liked the wheels, so it was time to look around at some that would do the trick. It was suggested to go 25mm rear and 20mm front, I opted for 20/15mm instead. Having read a ton of the reviews and seeing issues others had with the inferior spacers, I went with these are they're forged/machined aluminum that are anodized, not the typical pot metal cast aluminum ones or stamped steel. Slapped em on, drove around and not a single bit of vibration, shake or shimmy. The car drives as smooth as it had without them on the previous wheel set. It's very important to note, you DON'T use an impact on them. It says clearly hand tighten at 70-80 foot pounds of torque. I would guess many who have issues either have a tire shop slap em on and they use impacts or they themselves do as well thinking it won't matter. It might not, but then again, they leave these instructions for a reason. The packaging was nice as everything including each lug bolt were individually wrapped to protect from any knicks or scratches. These are well worth the money and they do exactly what they were purchased to do.

These spacers appear to be nicely hard aluminum AND, the machined fit was absolutely perfect around the hub of our BMW e60. I applied a wire brush to the slightly rusty hub, applied some anti seize, and the spacers held in place with a light bump of my palm on the hub - allowing easy wheel mounting. There was no slop between the spacers and the wheel. There was no space between the spacers and the hub. Beautiful !

These are excellent quality spacers. I bought them for my E92 M3 after getting aftermarket wheels that were slightly thinner than the stock 220m wheels. The items were package well (that’s always a good sign). It comes with the longer studs/lug nuts which is great to pair with my new wheels since the OEM ones were worn. The spacers themselves feel solid and heavy duty.

Yes these are precision machines and will fit perfectly. The bolts that come with this are rubbish. Be carful how to start to turn the bolt as it threads over at the start. Got all of them to go on except for the last one so now I’m running one wheel bolt short. Otherwise the spacer feels fine and no wiggle at 150kph

I have zero complaints about these spacers. I will be writing the same review for both the 20mm and 15mm spacers because that’s the combo I used for my car. I put the 20mm in the rear and 15mm in the front and with my msport suspension it looks perfect to me. I attached before and after pictures for reference as well. As for how they make the car look I can’t say enough good about them and the build quality is outstanding. I would recommend anyone to buy these and for the money you are getting a hell of a product!

I used these on my car and have been using them for 70,000km and about 3 years. I have mounted multiple different OEM and aftermarket wheels and they all fit snug. I did not use the included lug bolts so I can't speak on their behalf. The spacer is good and If I will ever be buying again I will buy these because I feel safe on them and they are a good price.

Got these for the front wheels on my 335i, as well as a set of 20mm for the rears. So far so good; quality seems high and fit/finish are nice as well. My summer wheels are staggered 19s (225/35zr19 front, 255/30zr19 rear) and my winters are matching 18s (245/40zr18) - the addition of these front and rear spacers actually give the smaller 18” wheels a more aggressive stance than the 19” wheels without spacers. Then the 19s with this spacer setup is 12/10. The lug bolts that come with the spacers look nice as well.

My friends make fun of me for getting spacers off Amazon but they work great the bolts are great quality and have been through 2 Canadian winters with no issue I will always buy these for all my bmw spacer needs

I installed mine pretty simple if you know what you doing cleaning the hub before putting these on is also important no shakes no other things that i have noticed in my rides i also took pictures before and after too, i do it i got 15mm in front 20mm at the back they are nicely designed as well great job you guys

Used a couple different kinds over years and these are the best I've seen. Hubs have perfect tolerance and the bolts seem very strong. I accidentally over torqued them (110+ lbs) on a track day and no issues.