TIVOLY - T-Gun F300 Cartridge Gun - Can be Fitted to Drill and Screw Guns - for Ø 1,96" - 10,48 fl oz cartridges

Bought this to glue coving up but due to having carpal tunnel I was unable to squeeze the trigger on the gun. Well this solved that problem, it was brilliant. Yanno you see those videos of people using a 'fantastic tool' but when you order it and try to use it you are unable to replicate it...well not with this. See the video, that's exactly how easy it is to use it and exactly how to use it. This is invaluable for people who struggle to squeeze a trigger on a gun (caulking gun not pistol). I am going to be no-nails sticking stuff with ease now. Brilliant!

Very good piece of kit, just make sure you follow the instructions and have it on the screw setting, and be careful winding it back in as you could snap the plastic frame if you over do it. Will be getting a back up second when on offer!

Having received the gun and unpacked it, the first thing I did was to turn the drive shaft by hand to see what happened. I was disappointed to find that the shaft moved with difficulty and irregularly indicating to me that there was insufficient grease inside the gearbox. The gearbox is easy to dismantle, yes, I know this will invalidate any guarantee, and sure enough, although there was a little grease on the teeth of the three gears, there certainly wasn't enough and there was no grease on any of the bearing surfaces. I liberally coated one of the gears with grease as well as all the bearing surfaces, reassembled the gearbox and tried again. This time the drive shaft moved smoothly and easily. I ran the plunger in and out a few time so as to distribute the grease from the greased gear to all the others. First problem solved. The second issue is that the Bosch cordless screwdriver I use does not fit into the gun unless I use the larger 4Ah battery which makes the unit a lot heavier and more awkward to use. Typically I use the 2Ah battery with this driver. Once the issues were sorted out, the gun appear to work well although I think it would have difficulty with some of the roofing sealants I occasionally use unless the hole in the nozzle is large enough to reduce the force required to push the sealant out. The punger is just threaded plastic and trying to extrude a very stiff sealant may well strip the threads. However, for the purposes for which I bought the gun, it will suffice admirably. Shame about the grease...

Worked really well for injecting roof sealing mastic between sheets of roofing felt on a large shed. Roof too deep to climb onto and nail down the felt. The gun worked easily at arms length and effortlessly spread the sealant between the two layers of felt. Light and easy to use. Fitted my Makita combi drill really well. A very cost effective solution compared to bespoke cordless caulking guns.

The Tivoly t-gun supplied by Amazon does not have the steel reinforcement plate at front of machine. This means that the plastic frame can easily crack if too much pressure is applied e.g possible with viscous materials or if plunger hits end of tube. The drive gearing is plastic as well and it is highly geared so plunger moves too fast for precision work,even when pressing lightly on drill trigger. The model supplied is lightweight model probably F300 whereas the pictures look like they are mostly for the F450 heavier duty model. It is good for applying large quantities of softer sealants roughly e.g sealing between roof sheets or on coving. Could have been a decent gun if the plate was present and the gearing was lower. Contrary to at least one reviews the rod that pushes the plunger is actually blackened steel and not plastic.

A brilliant bit of kit. I damaged the tendons in both hands a few years ago and have found using a caulking gun very painful. This devise makes caulking an absolute breeze. Be sure to set your drill to the “screw” setting with the torque setting to no more than 10, otherwise when the tube reaches the end of its travel, the end plate will break.

Works well, easy to use, does all the hard work for you.

Read other reviews and modified it accordingly, with a plate across the front to give the plastic some support for when it comes under pressure. Not sure if it's needed but I didn't want to leave anything to chance for the project I'm working on

This is a fantastic thing! Total hand-saver! Worth every penny!

Me parece una idea muy práctica que permite aprovechar el taladro de mano para no tener que tener otra herramienta de batería más rodando por casa. Cumple para un uso normal y permite dar un chorro continuo de producto. Lo he utilizado para renovar las juntas exteriores de las ventanas de pvc y ha quedado muy bien.

très pratique

working fantastic specially for think caulk for car windsheild. so happy with product

Produit de qualité et fonctionnel, bien utile