Adjustable Magnetic Planer Jointer Knife blade Vernier Setter Jig Gauge

The gauge on them is worthless. The way I got mine to be even and to be the right depth was to place the jig on the cutter head in a place where there were no knives or anything and then I used a feeler gauge to set the plungers at the same correct height (50 thousands for my 20" delta planner). After that I locked them in place and used them as you would expect. Worked perfect. Easy to use. 10/10 I would recommend.

The vernier adjustments are really only good for relative measurement use. They are not really marked well for absolute measurement usage. Acceptable for setting up planer blades

Product is unusable because the body is made of plastic. The set screw that holds the main magnet in adjustment is brass but because it threads into the plastic body, which, again, is plastic, the soft, soft, soft plastic threads strip immediately on the first effort to tighten the set screw. So, since the magnet cannot be held in adjustment, the tool is useless. It's as simple as that. If the body were made of metal this might be a good tool. As it is, it's just junk.

Pretty cheaply built, the sticker indications are a joke and the adjustments aren't accurate. I bought it thinking the offset would help on large diameter cutterheads, but it does not.

Like other reviews have said, the scale is worthless. I purchased these knowing that, and used them by just setting the depth in both using a depth gauge, then locking them in place. The magnet works well, holding the 15" planer blades securely in place.

Not high tech. I returned these since they were to big for my shop planer

Not even some adjustment

I thought the number scales were in millimeters or thousandths, but are neither. I used on a Delta planer and to be useful first clamp on round planer blade shaft and zero both of them with setscrew and knob. Then use feeler gauge to adjust to desired depth and lock in place. You can then match the setting with other unit matching the gauge numbers. They are OK for a "relative value" but having nothing to do with the actual distance. Would I buy again? Ya, probably, if they are considerably cheaper than the setting gauge made for my planer.

Calidad- precio

I ran into one little problem and it was my fault as the cutting blade holder on my jointer is aluminum and the magnets will not work, but a found a work-around to this little problem. To anyone looking to buy a set of the adjustable magnetic planer jointer knife blade setter to to check if the jointer head is aluminum or metal for the magnets to work before you order a set.

producto de buena calidad por el recio que pague y muy utiles para calibrar los filos de la canteadora

It seemed a little flimsy but it did the trick to set my planer blades. Would certaintly order it again.

Its very well built and adjustable